TVS Diode Array General Purpose ESD Protection - SP05 Series RoHS Pb GREEN SP05 Series - 30pF 30kV Unidirectional TVS Array Description This surface mount family of arrays suppress ESD and other transient overvoltage events. Used to meet the International Electrotechnical Compatibility (IEC transient immunity standards IEC 61000-4-2 for Electrostatic Discharge Requirements), these components can help protect sensitive digital or analog input circuits on data, signal, or control lines with voltage levels up to 5VDC. The monolithic silicon arrays are comprised of specially designed structures for transient voltage suppression (TVS). The size and shape of these structures have be tailored for transient protection. Compared to MOVs, this diode array provides a lower clamping voltage and lower off-state Pinout capacitance. SP0502BAHTG SP0503BAHTG SP0504BAHTG SP0502BAJTG SP0504BAJTG 1 5 1 Features 4 1 An Array of 2, 3, 4, 5 or 6 TVS Avalanche Diodes in a ultra small SC70, SOT-23, SOT-143 or MSOP packages 3 2 ESD Capability Standards - IEC 61000-4-2, Direct Discharge ........ 30kV (Level 4) 2 2 3 3 4 - IEC 61000-4-2, Air Discharge .............. 30kV (Level 4) - MIL STD 883 3015.7 ..........................................30kV SP0505BAHTG SP0506BAATG Input Protection for Applications Up to 5VDC SP0505BAJTG 8 76 5 Fast Response Time ..................................................<1ns 1 6 Low Input Capacitance ...................................30pF Typical Operating Temperature Range....................-40C to 125C 2 5 Moisture Sensitivity Level (MSL-1) Applications 3 4 Mobile phone handsets Digital still cameras 4 1 2 3 Personal Digital Digital video cameras Assistants (PDA) MP3 players Portable handheld equipment (Laptop, Palmtop computers) Computer port, keyboard (USB1.1) Additional Information Datasheet Resources Samples Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.12/11/20TVS Diode Array General Purpose ESD Protection - SP05 Series Absolute Maximum Ratings Symbol Parameter Rating Units P Peak Pulse Power (t =8/20s) 25 W PK p I Peak Pulse Current (t =8/20s) 3 A PP p T Operating Temperature 40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics T = +25C, Unless Otherwise Specified A Parameter Test Conditions Min Typ Max Units Reverse Standoff Voltage I 1A 5.5 V R Reverse Standoff Leakage Current V = 5.0V 1 100 nA Signal Clamp Voltage Positive I = 1mA 6.0 8.5 V Negative I = 10mA -1.2 -0.8 -0.4 V Clamp Voltage during ESD MIL-STD-883 Method 3015 (HBM) test + 8kV 12 V - 8kV -8 V ESD Test Level (1) - IEC-61000-4-2, Contact discharge 30 kV MIL-STD-883 Method 3015 (HBM) 30 kV Capacitance 2.5V 1MHz 30 pF Turn on/off Time <1 ns Diode Dynamic Resistance - Forward Conduction 1.0 Reverse Conduction 1.4 Note: 1. ESD voltage applied between channel pins and ground, one pin at a time all other channel pins are open all ground pins are grounded. Typical Diode Capacitance vs. Reverse Voltage 60 40 20 0 0 2 1 3 4 5 Diode Reverse Voltage (V) 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.12/11/20 Diode Capacitance (pF)