TVS Diode Arrays (SPA Diodes) Low Capacitance ESD Protection - SP0504S Series RoHS Pb GREEN SP0504S Series 0.85pF Diode Array Description The SP0504S integrates low capacitance rail-to-rail diodes with an integrated proprietary avalanche breakdown diode that protects applications against ESD, EFT and low surge events. This component is rated for the maximum IEC 61000-4-2 ESD (level 4) contact and air discharge events. Their very low off-state capacitance also makes them ideal for protecting high speed signal pins such as HDMI, DVI, USB2.0, and IEEE 1394. Pinout Features R oHS compliant and (5/50ns) I/O 1 I/O 4 lead-free L ow leakage current of Low off-state capacitance 0.5A (MAX) at 5V of 0.85 pF (TYP) per I/O V Small packaging options GND CC ESD rating of 1 2kV saves board space contact discharge, Lightning, 4.5A (8/20s I/O 2 I/O 3 15kV air discharge, as defined in IEC 61000- (IEC 61000-4-2) nd 4-5 2 edition) SOT23-6 EFT protection, IEC AEC-Q101 qualified 61000-4-4, 40A Functional Block Diagram Applications I/O2 V I/O4 CC Computer Peripherals Network Hardware/Ports Mobile Phones Test Equipment PDAs Medical Equipment Digital Cameras Automotive Network Application Example I/O1 GND I/O3 RJ-45 Ethernet PHY Connector J1 Tx+ Additional Information Tx- Rx+ J8 Rx- Datasheet Resources Samples NC GND SP0504S A single 4 channel SP0504S component can be used to protect four of the data lines in a HDMI/DVI interface. Two (2) SP0504S components provide protection for the main data lines. Low voltage ASIC HDMI/DVI drivers can also be protected with the SP0504S, the +V pins on the SP0504S CC can be substituted with a suitable bypass capacitor or in Life Support Note: Not Intended for Use in Life Support or Life Saving Applications some backdrive applications the +V of the SP0504S can be CC The products shown herein are not designed for use in life sustaining or life saving oated or NC.fl applications unless otherwise expressly indicated. 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/19 TVS Diode Arrays (SPA Diodes) Low Capacitance ESD Protection - SP0504S Series Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 4.5 A PP p T Operating Temperature 40 to 125 C OP T Storage Temperature 55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I = 1A - - 6.0 V RWM R Reverse Leakage Current I V =5V - - 0.5 A LEAK R Breakdown Voltage V I =1mA 6.3 8 8.8 V BR R I =1A, t =8/20s, I/O to PP p - 9.5 11.0 V GND 1 Clamp Voltage V C I =2A, t =8/20s, I/O to PP p - 10.6 13.0 V GND IEC 61000-4-2 (Contact) 12 - - kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air) 15 - - kV Reverse Bias=0V, f=1MHz 0.95 1.1 1.25 pF 1 Diode Capacitance C I/O-GND Reverse Bias=1.65V, 0.7 0.85 1.0 pF f=1MHz 1 Diode Capacitance C Reverse Bias=0V, f=1MHz - 0.5 - pF I/O-I/O Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/22/19