SP1010-04UTG Littelfuse

SPA Silicon Protection Array Products 3.5pF Unidirectional TVS Array for ESD Protection RoHS Pb GREEN SP1010 Lead-Free/Green Series Description Zener diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide a high level of protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust diodes can safely absorb repetitive ESD strikes at the maximum level specied in the IEC 61000-4-2 international standard (Level 4, 8kV contact discharge) without performance degradation. Their very low loading capacitance also makes them ideal for protection high- speed signal pins. Pinout Features t L7 *& &4% LBHF Z V% / QBD 5JO t I/O (1) I/O (4) contact, 15kV air (1.25mm x 1.0mm x 0.5mm) t -JHIUOJOH *& GND GND 1A (t =8/20s) t & 5 QSPUFDUJPO p IEC61000-4-4, 40A X DBQBDJU BODF PG Q P t - I/O (2) I/O (3) (5/50ns) (TYP) per I/O uDFN-6 SFOU PG X MFBLBHF DVS P t - (1.25x1.0x0.5mm) 1A (MAX) at 5V Functional Block Diagram Applications t /PUFCPPL PSUWJDF BCMF NFEJDBM EF t 1 6 5 4 t /FUCPPL t .1 1.1 t 6MUSB NPCJMF 1 t %JHJU BM DBNFSB t .PCJMF QIPOF WJHBUJPO PSU BCMF OB t 1 device 1 2 3 F 4VQQPSU /PUF -JG Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. SP1010 Lead-Free/Green Series 2010 Littelfuse, Inc. 103 Specications are subject to change without notice. Revised: March 25, 2010 Please refer to SPA Silicon Protection Array Products 3.5pF Unidirectional TVS Array for ESD Protection Absolute Maximum Ratings Symbol Parameter Value Units I Peak Pulse Current (t =8/20s) 1.0 A PP p T Operating Temperature -40 to 85 C OP T Storage Temperature -60 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specication is not implied. Thermal Information Parameter Rating Units Storage Temperature Range -65 to 150 C Maximum Junction Temperature 150 C Maximum Lead Temperature (Soldering 10s) 260 C Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Voltage Drop V I = 1mA 7.0 7.8 8.5 V R R Reverse Standoff Voltage V I 1A 6 V RWM R Reverse Leakage Current I V = 5V 0.1 1 A LEAK R IEC61000-4-2 (Contact Discharge) 8 kV 1 ESD Withstand Voltage V ESD IEC61000-4-2 (Air Discharge) 15 kV Reverse Bias = 0V 6 7 Q 1 Diode Capacitance C D Reverse Bias = 2.5V Q /PUFT 1. Parameter is guaranteed by design and/or device characterization. SP1010 Lead-Free/Green Series 2010 Littelfuse, Inc. 104 Specications are subject to change without notice. Revised: March 25, 2010 Please refer to