TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) General Purpose ESD Protection - SP1015 Series RoHS Pb GREEN SP1015 Series 5pF, 20kV Bidirectional TVS Array Description The miniature 4 channel bidirectional TVS array provides protection for data lines that may experience destructive electrostatic discharges (ESD). These robust diodes can safely absorb repetitive ESD strikes well above the maximum level specified in the IEC 61000-4-2 international standard without performance degradation. The bidirectional configuration provides symmetrical ESD protection for data lines when AC signals are present. Functional Block Diagram Features 12 RoHS compliant, High density TVS Array Halogen-free and Lead- available today free 4 channels of protection ESD, IEC 61000-4-2, in a 0.95x0.55mm 20kV contact, 30kV air footprint EFT, IEC 61000-4-4,40A Touch screen and IC (5/50ns) interfaces Lightning protection, IEC 61000-4-5 2nd Edition, 2.0A (t =8/20s) p 3 GND 4 Pinout Applications Mobile Phones eReaders/eBooks Wearable Technology Tablets Smart Phones 1 2 Additional Information GND 3 4 Datasheet Resources Samples Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/08/16 TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) General Purpose ESD Protection - SP1015 Series Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 2.0 A PP p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Thermal Information Parameter Rating Units Storage Temperature Range -55 to 150 C Maximum Junction Temperature 150 C Maximum Lead Temperature (Soldering 20-40s) 260 C Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V 5.0 V RWM Reverse Breakdown Voltage V I =1mA 5.5 V BD R V =3V 0.05 A R Leakage Current I R V =5V 0.1 A R I =1A, t =8/20s, Fwd 11 V PP p 1 Clamp Voltage V C I =2A, t =8/20s, Fwd 12 V PP p 2 Dynamic Resistance R TLP, t =100ns, I/O to GND 0.65 DYN p IEC 61000-4-2 (Contact Discharge) 20 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V (I/O to GND) 5 pF D Note: 1 Parameter is guaranteed by design and/or device characterization. 2 Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Pulse Waveform Transmission Line Pulse (TLP) 110% 20 100% 18 90% 16 80% 14 70% 12 60% 10 50% 8 40% 6 30% 4 20% 2 10% 0 0% 05 10 15 20 25 0.0 5.0 10.0 15.0 20.0 25.0 30.0 TLP Voltage (V) Time (s) 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/08/16 Percent of I PP TLP Current (A)