TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) General Purpose ESD Protection - SPxx-01WTG-C-HV Series RoHS Pb GREEN SPxx Series 100W Discrete Bidirectional TVS Diode Description The SPxx-01WTG-C-HV series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed I/Os. It will protect sensitive equipment from damage due to electrostatic discharge (ESD) and other overvoltage transients. The SPxx-01WTG-C-HV series can safely absorb repetitive ESD strikes above the maximum level of the IEC 61000- 4-2 international standard (Level 4, 8kV contact discharge) without performance degradation and safely dissipate up to 8A (SP12-01WTG-C-HV) of induced surge current (IEC 61000-4-5, t =8/20s) with very low clamping P voltages. Pinout Features ESD, IEC 61000-4-2, Low clamping voltage 30kV contact, 30kV air Low leakage current EFT, IEC 61000-4-4, 40A Halogen free, Lead free 1 and RoHS compliant (5/50ns) IEC 61000-4-5, 2nd Edition: 8/20 Surge, 8A Surge Immunity. SP12- 01WTG-C-HV. 2 Applications Functional Block Diagram LED Lighting Modules Mobile & Handhelds Portable Instrumentation RS232 / RS485 General Purpose I/O CAN bus 2 1 Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving Additional Information applications unless otherwise expressly indicated. Datasheet Resources Samples 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/17 TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) General Purpose ESD Protection - SPxx-01WTG-C-HV Series Absolute Maximum Ratings Symbol Parameter Value Units P Peak Pulse Power (t =8/20s) 100 W pk p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Thermal Information Parameter Rating Units Maximum Junction Temperature 150 C Maximum Lead Temperature (Soldering 20-40s) 260 C SP12-01WTG-C-HV Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I 1A, 1 pin to GND 12.0 V RWM R Reverse Breakdown Voltage V I =1mA, 1 pin to GND 13.3 V BR R Leakage Current I V =12V, 1 pin to GND 0.1 A LEAK R I =1A, t =8/20s, Fwd 16 V PP p 1 Clamp Voltage V C I =8A, t =8/20s, Fwd 19 V PP P 2 Dynamic Resistance R TLP, t =100ns, 1 pin to GND 0.4 DYN p Peak Pulse Current I t =8/20s 8.0 A pp p IEC61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 26 30 pF D-GND Note: 1 Parameter is guaranteed by design and/or component characterization. 2 Transmission Line Pulse (TLP) test setting : Std.TDR(50),tp=100ns, tr=0.2ns ITLP and VTLP averaging window: start t1=70ns to end t2=80ns SP15-01WTG-C-HV Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I 1A, 1 pin to GND 15.0 V RWM R Reverse Breakdown Voltage V I =1mA, 1 pin to GND 16.7 V BR R Leakage Current I V =15V, 1 pin to GND 0.1 A LEAK R I =1A, t =8/20s, Fwd 21 V PP p 1 Clamp Voltage V C I =5A, t =8/20s, Fwd 27 V PP p 2 Dynamic Resistance R TLP, t =100ns, 1 pin to GND 0.43 DYN p Peak Pulse Current I t =8/20s 5.0 A pp p IEC61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 21 24 pF I/O-GND Note: 1 Parameter is guaranteed by design and/or component characterization. 2 Transmission Line Pulse (TLP) test setting : Std.TDR(50),tp=100ns, tr=0.2ns ITLP and VTLP averaging window: start t1=70ns to end t2=80ns 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/17