TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP3001 Series RoHS Pb GREEN SP3001 Series 0.65pF Diode Array Description The SP3001 has ultra low capacitance rail-to rail diodes with an additional zener diode fabricated in a proprietary silicon avalanche technology to protect each I/O pin providing a high level of protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust diodes can safely absorb repetitive ESD strikes at the maximum level specified in the IEC 61000-4-2 international standard (Level 4, 8kV contact discharge) without performance degradation. Their very low loading capacitance also makes them ideal for protecting high speed signal pins such as HDMI, DVI, USB2.0, and IEEE 1394. Features Pinout Low capacitance of Small SC70 ( JEDEC MO- 0.65pF (TYP) per I/O 203) package saves board I/O 1 I/O 4 space ESD protection of 8kV contact discharge, 15kV Lightning Protection, IEC V GND air discharge, 61000-4-5, 2nd edition CC (IEC 61000-4-2) 2.5A (8/20s) EFT protection, IEC R oHS compliant and I/O 2 I/O 3 61000-4-4, lead-free 40A (5/50ns) AEC-Q101 qualified Low leakage current of 0.5A (MAX) at 5V Functional Block Diagram I/O2 V I/O4 CC Applications Computer Peripherals Network Hardware/Ports Mobile Phones Test Equipment PDAs Medical Equipment Digital Cameras I/O1 GND I/O3 Application Example Additional Information +5V A single 4 channel SP300x-04 D2+ D2+ device can be used to protect Gnd D2- D2- four of the data lines in a 6 5 4 HDMI/DVI interface. Two (2) SP300x-04 1 2 3 Datasheet Resources Samples SP300x-04 devices provide D1+ D1+ Gnd protection for the main data D1- D1- lines. Low voltage ASIC HDMI HDMI or DVI or DVI HDMI/DVI drivers can also be Interface Connector IC protected with the SP300x-04, D0+ D0+ Gnd the +V pins on the SP300x-04 D0- CC D0- can be substituted with a 6 5 4 SP300x-04 1 2 3 suitable bypass capacitor or in Clk+ Clk+ some backdrive applications the Gnd Clk- Clk- +V of the SP300x-04 can be CC Life Support Note: oated or NC.fl Gnd Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/06/19 TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP3001 Series Absolute Maximum Ratings Thermal Information Symbol Parameter Value Units Parameter Rating Units I Peak Current (t =8/20s) 2.5 A Storage Temperature Range 55 to 150 C PP p T Operating Temperature 40 to 125 C Maximum Junction Temperature 150 C OP Maximum Lead Temperature T Storage Temperature 55 to 150 C 260 C STOR (Soldering 20-40s) CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I 1A 6 V RWM R Reverse Leakage Current I V =5V 0.5 A LEAK R I =1A, t =8/20s, Fwd 9.5 11.0 V PP p 1 Clamp Voltage V C I =2A, t =8/20s, Fwd 10.6 13.0 V PP p IEC61000-4-2 (Contact) 8 kV 1 ESD Withstand Voltage V ESD IEC61000-4-2 (Air) 15 kV Reverse Bias=0V 0.7 0.8 0.9 pF 1 Diode Capacitance C I/O-GND Reverse Bias=1.65V 0.55 0.65 0.75 pF 1 Diode Capacitance C Reverse Bias=0V 0.35 pF I/O-I/O Note: 1. Parameter is guaranteed by design and/or device characterization. Insertion Loss (S21) I/O to GND Capacitance vs. Bias Voltage 1 1.00 0 0.95 -1 0.90 -2 0.85 -3 0.80 V = Float -4 CC 0.75 -5 0.70 -6 V = 3.3V CC 0.65 -7 V = 5V CC 0.60 -8 -9 0.55 -10 0.50 1.E+06 1.E+07 1.E+081.E+09 1.E+10 0.0 0.5 1.01.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 I/O DC Bias (V) Frequency Hz 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/06/19 Insertion Loss dB I/O Capacitance (pF)