TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP3019 RoHS Pb GREEN SP3019 0.3pF SOT23-6L 4 Channels Diode Array Description The SP3019 integrates 4 channels of ultra low capacitance asymmetrical protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust components can safely absorb repetitive ESD strikes above the maximum contact level specified in IEC 61000-4-2 *Pins 6, 7, 9, 10 are not internally connected (8kV contact discharge) without performance degradation. but should be connected to the trace. 4 5 6 6 7 8 9 10 The extremely low off-state capacitance also makes it ideal for protecting high speed signal lines such as USB3.0, HDMI, USB2.0, and eSATA. 5 4 3 2 1 3 2 1 SP3012-03UTG SP3012-04UTG (AEC-Q101 Qualied) Pinout Features SP3012-03UTG ESD, IEC 61000-4-2, Low leakage current of SP3012-06UTG 6 5 4 10nA (TYP) at 5V +/-10kV contact, +/-15kV air 8 14 AEC-Q101 qualified EFT, IEC 61000-4-4, 40A (t =5/50ns) Moisture Sensitivity P PIN 1 PIN 11 Level (MSL -1) PIN 8 Lightning, 2.5A (8/20 as PIN 12 PIN 4 defined in IEC 61000-4-5 Halogen free, lead free PIN 13 nd PIN 9 2 Edition) and RoHS compliant PIN 5 PIN 14 7 1 Low capacitance of 0.3pF PPAP capable SP3012-06UTG (AEC-Q101 Qualied) 0V, 3GHz (TYP) per I/O *Pins 1, 2, 3, 4, 5, 6, 7 are not internally connected 1 2 3 but should be connected to the opposite pin SP3012-04HTG(AEC-Q101 Qualied) with the PCB trace. GND (PIN 2) PIN 10 SP3012-04UTG SP3012-04HTG Functional Block Diagram Applications LCD/PDP TVs Set Top Boxes External Storages Smartphones DVD/Blu-ray Players Ultrabooks/Notebooks PIN 1 PIN 1 PIN 2 PIN 3 Desktops Digital Cameras PIN 4 PIN 4 MP3/PMP PIN 5 PIN 6 GND (PIN 3, 8) GND (PIN 2) Note: PIN 5 is NC Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.01/12/21 TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP3019 Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 2.5 A PP p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I 1A 5.0 V RWM R Reverse Leakage Current I V =5V, Any I/O to GND 0.01 0.50 A LEAK R Breakdown Voltage V I =1mA 8.2 V BR R I =1A, t =8/20s, Fwd 10.5 V PP p 1 Clamp Voltage V C I =2A, t =8/20s, Fwd 11.5 V PP p 2 Dynamic Resistance R TLP, t =100ns, I/O to GND 0.64 DYN P IEC 61000-4-2 (Contact) +/- 10 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air) +/- 15 kV C 0.3 I/O-GND 1 Diode Capacitance Reverse Bias=0V, f=3 GHz pF C 0.18 I/O-I/O Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Positive Transmission Line Pulsing(TLP) Plot Positive Transmission Line Pulsing(TLP) Plot 40 0 35 30 -5 25 20 -10 15 10 -15 5 0 -20 05 10 15 20 25 30 35 -20-18 -16-14 -12-10 -8 -6 -4 -2 0 TLP Voltage (V) TLP Voltage (V) 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.01/12/21 TLP Current (A) TLP Current (A) SP3012