TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) Lightning Surge Protection- SP3384NUTGSP3025-04HTG RoHS Pb GREEN SP3025-04HTG, 2.5V, 30A Diode Array Description The SP3025-04HTG is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge), CDE (cable discharge events), EFT (electrical fast transients), and lightning induced surges for highspeed, differential data lines. Its packaged in a SOT23- 6L and each device can protect up 4 channels up to 30A nd (IEC 61000-4- 5 2 edition,) and up to 30kV ESD (IEC 61000-4-2). *Pins 6, 7, 9, 10 are not internally connected The SP3025-04HTG with its low capacitance and low but should be connected to the trace. 4 5 6 6 7 8 9 10 clamping voltage makes it ideal for high-speed data interfaces such as 1GbE applications found in notebooks, switches, etc. 5 4 3 2 1 3 2 1 Pinout Features SP3012-03UTG SP3012-04UTG (AEC-Q101 Qualied) ESD, IEC 61000-4-2, Low operating and 6 5 4 30kV contact, 30kV air clamping voltage 8 14 EFT, IEC 61000-4-4, 40A Provides protection for (5/50ns) two differential data pairs (4 channels) up to 30A Lightning, IEC 61000- nd 4-5 2 edition, 30A Halogen free, Lead free (t =8/20s) and RoHS compliant P 7 1 SP3012-06UTG (AEC-Q101 Qualied) Low capacitance of Moisture Sensitivity Level *Pins 1, 2, 3, 4, 5, 6, 7 are not internally connected 1 2 3 1.7pF 0V (TYP) (MSL -1) but should be connected to the opposite pin SP3012-04HTG(AEC-Q101 Qualied) with the PCB trace. Low leakage current of 1nA (TYP) at 2.5V Functional Block Diagram Applications 10/100/1000 Ethernet LVDS Interfaces WAN/LAN Equipment Integrated Magnetics Desktops, Servers and Smart TV Notebooks 2.5G/5G/10G Ethernet Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 01/14/20 TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) Lightning Surge Protection- SP3384NUTGSP3025-04HTG Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 30 A PP p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I = 1A 2.5 V RWM R Breakdown Voltage V I = 1mA 5.5 7.0 V BR R Reverse Leakage Current I V =2.5V 1 100 nA LEAK R Holding Voltage V I/O to GND 1.6 V HOLD 1 Clamp Voltage V I =30A, t =8/20s 9 11 V C PP p 2 Dynamic Resistance R TLP, t =100ns 0.14 DYN p IEC 61000-4-2 (Contact Discharge) 30 kV 1,3 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV C 1.7 2.5 I/O-GND 1 Diode Capacitance Reverse Bias=0V, f=1MHz pF C 0.8 1.2 I/O-I/O Notes: 1Parameter is guaranteed by design and/or component characterization. 2 Transmission Line Pulse (TLP) test setting : Std.TDR(50),tp=100ns, tr=0.2ns ITLP and VTLP averaging window: start t1=70ns to end t2=90ns 3. Device stressed with ten non-repetitive ESD pulses. 8/20s Pulse Waveform Capacitance vs. Reverse Bias 110% 100% 2.5 90% 80% 2.0 70% 1.5 60% 50% 1.0 40% 0.5 30% 20% 0.0 10% 0.00.5 1.01.5 2.02.5 0% Bias Voltage (V) 0.0 5.0 10.0 15.0 20.0 25.0 30.0 Time (s) 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 01/13/20 Percent of I PP Capacitance (pF)