GND GND GND TVS Diode Array (SPA Diodes) Lightning Surge Protection - SP3374NUTG RoHS Pb GREEN SP3374NUTG 3.3V 40A Diode Array Description The SP3374NUTG is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge), CDE (cable discharge events), EFT (electrical fast transients), and lightning induced surges for high-speed, differential data lines. Its packaged in a DFN package (3.0 x 2.0mm) and each device can protect up 4 channels or 2 nd differential pairs, up to 40A (IEC 61000-4-5 2 edition,) and up to 30kV ESD (IEC 61000-4-2). The flow-through design minimizes signal distortion, reduces voltage overshoot, and provides a simplified PCB design. The SP3374NUTG with its low capacitance and low clamping voltage makes it ideal for high-speed data interfaces such as 1GbE applications found in notebooks, switches, etc. Pinout Features ESD, IEC 61000-4-2, DFN-10 package is Top View Bottom View 30kV contact, 30kV air optimized for high-speed 1 2 3 4 5 10 9 8 7 6 data line routing EFT, IEC 61000-4-4, 40A (5/50ns) Provides protection for two differential data pairs Lightning, 40A (8/20s as (4 channels) up to 40A defined in IEC 61000-4-5 2nd Edition) Low operating and clamping voltage Low capacitance of 1 2 3 4 5 10 9 8 7 6 3.5pF 0V (TYP) per I/O AEC-Q101 qualified NOTE: PIN3, PIN8 are same potential with GND Low leakage current of Halogen free, Lead free 0.1A (TYP) at 3.3V and RoHS compliant Functional Block Diagram Applications 10/100/1000 Ethernet LVDS Interfaces LINE1 IN (Pin 1) LINE1 OUT (Pin 10) WAN/LAN Equipment Integrated Magnetics Desktops, Servers and Smart TV LINE2 IN (Pin 2) LINE2 OUT (Pin 9) Notebooks Application Example RJ -45 Connector Ethernet PHY GND GND TP0+ TP0- TP1+ LINE3 IN (Pin 4) LINE3 OUT (Pin 7) TP1- TP2+ LINE4 OUT (Pin 6) LINE4 IN (Pin 5) TP2- TP3+ TP3- Life Support Note: Not Intended for Use in Life Support or Life Saving Applications SP2574N SP3374 The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/13/19 GND GND GND TVS Diode Array (SPA Diodes) Lightning Surge Protection - SP3374NUTG Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 40 A PP p P Peak Pulse Power (t =8/20s) 1000 W Pk p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I 1A 3.3 V RWM R Reverse Leakage Current I V = 3.3V, T = 25C 0.1 0.5 A R RWM Snap Back Voltage V I = 50mA 2.8 V SB SB I = 1A, t = 8/20s PP p 5.5 Any I/O to Ground I = 10A, t = 8/20s PP p 10.5 Any I/O to Ground Clamp Voltage V V I = 25A, t = 8/20s C PP p 18.0 Any I/O to Ground I = 40A, t = 8/20s PP p 1 Line-to-Line , two I/O Pins 25.0 connected together on each line 2 Dynamic Resistance R TLP, t =100ns, Any I/O to Ground 0.15 DYN p IEC 61000-4-2 (Contact) 30 kV ESD Withstand Voltage V ESD IEC 61000-4-2 (Air) 30 kV Between I/O Pins and Ground C 3.5 5.0 pF I/O to GND V = 0V, f = 1MHz R Diode Capacitance Between I/O Pins C 1.7 pF I/O to I/O V = 0V, f = 1MHz R Notes: 1. Rating with 2 pins connected together per sugguested diagram ( For example, pin1 is connected to pin 10, pin 2 is connected to Pin 9, Pin 4 is connected to pin 7 and pin 5 is connected to pin 6) 2. Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/13/19