TVS Diode Arrays (SPA Diodes) Low Capacitance ESD Protection - SP4010 RoHS Pb GREEN SP4010 0.48pF Diode Array Description The SP4010 integrates 2 channels of ultra low capacitance asymmetrical protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust components can safely absorb repetitive ESD strikes above the maximum contact level specified in the IEC 61000-4-2 international standard (30kV contact *Pins 6, 7, 9, 10 are not internally connected discharge) without performance degradation. but should be connected to the trace. 4 5 6 6 7 8 9 10 The extremely low off-state capacitance also makes it ideal for protecting high speed signal lines such as USB3.0,HDMI, USB2.0, and eSATA. 5 4 3 2 1 3 2 1 SP3012-03UTGPinout SP3012-04UTG (AEC-Q101 Qualied) Features ESD, IEC 61000-4-2, Low leakage current of 6 5 4 30kV contact, 30kV air 0.2A (MAX) at 10V 8 14 EFT, IEC 61000-4-4, 40A Moisture Sensitivity (t =5/50ns) Level (MSL -1) P Lightning, IEC 61000- Halogen free, lead free nd 4-5 2 edition, 23A and RoHS compliant (t =8/20s) P 7 1 Low capacitance of SP3012-06UTG (AEC-Q101 Qualied) 0.48pF 0V, 1MHz (TYP) *Pins 1, 2, 3, 4, 5, 6, 7 are not internally connected 1 2 3 per I/O but should be connected to the opposite pin SP3012-04HTG(AEC-Q101 Qualied) with the PCB trace. Functional Block Diagram Applications LCD/PDP TVs Set Top Boxes External Storages Smartphones I/O1 DVD/Blu-ray Players Ultrabooks/Notebooks Desktops Digital Cameras MP3/PMP I/O2 Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/23/20 TVS Diode Arrays (SPA Diodes) Low Capacitance ESD Protection - SP4010 Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 23 A PP p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I = 1A 10 V RWM R Breakdown Voltage V I = 1mA, I/O to I/O 10.5 12.5 V BR R Reverse Leakage Current I V =10V, , I/O to I/O 0.01 0.2 A LEAK R I =16A, t =8/20s, I/O to I/O 27.5 29 V PP p 1 Clamp Voltage V C I =23A, t =8/20s, I/O to I/O 39 43 V PP p 2 Dynamic Resistance R TLP, t =100ns, I/O to I/O 0.7 DYN p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz, I/O to I/O 0.48 1 pF I/O-I/O Note: 1. Parameter is guaranteed by design and/or component characterization. 2. Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Positive Transmission Line Pulsing (TLP) Plot Negative Transmission Line Pulsing (TLP) Plot 0 24 -2 22 -4 20 -6 18 16 -8 14 -10 12 -12 10 -14 8 -16 6 -18 4 -20 2 -22 0 -24 05 10 15 20 25 30 -30-25 -20-15 -10-50 TLP Voltage (V) TLP Voltage (V) 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/23/20 TLP Current (A) TLP Current (A) SP3012