TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP5001 Series RoHS GREEN Pb SP5001 Series 4 Channel TVS Common Mode Filter Description The SP5001 Series is a highly integrated Common Mode Filter (CMF) providing both ESD protection and EMI common mode noise filtering for systems using high speed differential serial interfaces, such as MIPI D-PHY or HDMI. The SP5001 Series can protect and filter two differential line pairs in a small RoHS-compliant TDFN-10 package, with cost and space savings over discrete solutions. Pinout Features Large differential TDFN-10 2.50mm In 1+ 1 1 0 Out 1+ bandwidth > 2.5 GHz 2.00mm 0.75mm package with 0.50mm High Common Mode In 1- 2 9 Out 1- lead pitch Stop Band Attenuation: GND 3 8 GND RoHS-compliant, Lead- > 25 dB at 700 MHz free packaging > 30 dB at 800 MHz In 2+ 4 Out 2+ 7 15kV ESD protection Moisture Sensitivity Level per channel (IEC 61000- In 2- 5 Out 2- (MSL-1) 6 4-2 Level 4, contact discharge and 30kV air Note :This drawing is not to scale. discharge) Functional Block Diagram Applications HDMI/DVI Display in MIPI D-PHY (CSI-2, DSI, Pin10 Pin1 Mobile Phones etc) in Mobile Phones and Digital Still Cameras Pin9 Pin2 External Internal (Connector) (ASIC) Pin7 Pin4 Pin6 Pin5 Pin3 Pin8 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/19/19 TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP5001 Series Absolute Maximum Ratings Symbol Parameter Value Units I DC Current Per Line 100 mA DC P DC Package Power Rating 0.5 W DC T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Channel Resistance R Pins 110, 29, 47 and 56 8.0 CH V = 1.65V Reverse Bias I/O DC Total Channel Capacitance C 0.8 1.3 pF TOTAL f=1MHz, 30mV AC Reverse Standoff Voltage V 5.0 V RWM Breakdown Voltage V I =1mA 6.0 8.0 10.0 V BR T Forward Voltage at I V I =1mA 0.4 0.7 1.5 V F F F Reverse Leakage Current I V =3.3V 0.01 0.10 A LEAK I/O Positive (tp=8/20s) 1.3 2 3 Dynamic Resistance R Negative (tp=8/20s) 0.7 DYN TLP, tp=100ns, I/O to GND 0.36 IEC 61000-4-2 (Contact Discharge) 15 kV 1 2 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV Differential Mode Cutoff F Z =50 , Z 50 2.5 GHz 2 3dB SOURCE LOAD Frequency Common Mode Stop Band F f=800MHz 30 dB 2 Attenuation Notes: 1. ESD zapping at I/O pins (1,2,4,5) with respect to GND. 2. Guaranteed by design. 3. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Differential Mode Attenuation SDD21 vs. Frequency Common Mode Attenuation SCC21 vs. Frequency (Zdiff = 100) (Zcomm= 50) 0 0 -1 -5 -2 -10 -3 -15 -4 -5 -20 -6 -25 -7 -30 -8 -35 -9 -10 -40 110100 1000 110100 1000 Frequency (MHz) Frequency (MHz) 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/19/19 Insertion Loss(dB) Inser on Loss(dB)