TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP5002 Series RoHS Pb GREEN SP5002 6 Channel Common Mode Filter 12/31/2020 ESU270-49 SP5001-04TTG for functional Description The SP5002 Series is a highly integrated Common Mode Filter (CMF) providing both ESD protection and EMI common mode noise filtering for systems using high speed differential serial interfaces, such as MIPI D-PHY. The SP5002 Series can protect and filter three differential line pairs in a small RoHS-compliant TDFN-16 package, with cost and space savings over discrete solutions. Pinout Features Large differential TDFN-16 4.00mm In 1+ 1 16 Out1+ bandwidth > 2GHz 2.00mm 0.75mm 2 15 In 1- Out1- package with 0.50mm High Common Mode GND 3 14 GND lead pitch Stop Band Attenuation: In 2+ 4 13 Out2+ RoHS-Compliant, Lead- > 25 dB at 700 MHz 5 Free packaging In 2- 12 Out2- > 30 dB at 800 MHz GND 6 11 GND 15kV ESD protection Moisture Sensitivity Level per channel (IEC 61000- (MSL-1) In 3+ 7 10 Out3+ 4-2 Level 4, contact In 3- 8 9 Out3- discharge and 30kV air Note :This drawing is not to scale. discharge) Functional Block Diagram Applications MIPI D-PHY (CSI-2, DSI, HDMI/DVI Display in Pin1 Pin16 etc) in Mobile Phones and Mobile Phones Pin2 Pin15 Digital Still Cameras Pin13 Pin4 External Internal (Connector) (ASIC) Pin5 Pin12 Pin7 Pin10 Pin8 Pin9 Pin3, Pin14 Pin6, Pin11 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/26/21 TVS Diode Array (SPA Diodes) Low Capacitance ESD Protection - SP5002 Series Absolute Maximum Ratings Symbol Parameter Value Units I DC Current Per Line 100 mA DC P DC Package Power Rating 0.5 W DC T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Channel Resistance R Pins 1-16, 2-15, 4-13, 5-12, 7-10, and 8-9 8.0 CH V = 1.65V Reverse Bias I/O DC Total Channel Capacitance C 0.8 1.3 pF TOTAL f=1MHz, 30mV AC Reverse Standoff Voltage V 5.0 V RWM Breakdown Voltage V I =1mA 6.0 8.0 10.0 V BR T Forward Voltage at I V I =1mA 0.4 0.7 1.5 V F F F Reverse Leakage Current I V =3.3V 0.01 0.10 A LEAK I/O Positive (tp=8/20s) 1.3 2 3 Dynamic Resistance R Negative (tp=8/20s) 0.7 DYN TLP, tp=100ns, I/O to GND 0.36 IEC 61000-4-2 (Contact Discharge) 15 kV 1 2 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV Differential Mode Cutoff F Z =50 , Z 50 2.0 GHz 2 3dB SOURCE LOAD Frequency Common Mode Stop Band F f=800MHz 30 dB 2 Attenuation Notes: 1. ESD zapping at I/O pins (1,2,4,5,7,8) with respect to GND. 2. Guaranteed by design. 3. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Differential Mode Attenuation SDD21 vs. Frequency Common Mode Attenuation SCC21 vs. Frequency (Zdiff = 100) (Zcomm= 50) 0 0 -0.5 -5 -1 -10 -1.5 -15 -2 -2.5 -20 -3 -25 -3.5 -30 -4 -35 -4.5 -5 -40 110100 1000 110100 1000 Frequency (MHz) Frequency (MHz) 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 08/26/21 Inser on Loss(dB) Insertion Loss(dB)