TVS Diode Array (SPA Diodes) General Purpose ESD Protection - SP5003 Series RoHS GREEN Pb SP5003 Series 4 Channel Common Mode Filter Description The SP5003 Series is a highly integrated Common Mode Filter (CMF) providing both ESD protection and EMI common mode noise filtering for systems using high speed differential serial interfaces, such as MIPI D-PHY or HDMI. The SP5003 Series can protect and filter two differential line pairs in a small RoHS-compliant TDFN-10 package, with cost and space savings over discrete solutions. Pinout Features Large differential 15kV ESD protection 10 1 bandwidth > 4.0 GHz per channel (IEC 61000- 4-2 Level 4, contact High Common Mode 9 2 discharge) Stop Band Attenuation: RoHS-compliant, Lead- > 16 dB at 900 MHz 8 3 free packaging Common Mode Imped ance: Zc: 32 at 100 MHz Moisture Sensitivity Level 7 4 (MSL-1) TDFN-10 2.50mm 2.00mm 0.75mm 6 5 package with 0.50mm lead pitch Note: Bottom-view Functional Block Diagram Applications Pin10 Pin1 HDMI/DVI Display in MIPI D-PHY (CSI-2, DSI, Mobile Phones etc) in Mobile Phones and Pin9 Pin2 External Internal Digital Still Cameras (Connector) (ASIC) Pin7 Pin4 Pin6 Pin5 Pin3 Pin8 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/23/20 TVS Diode Array (SPA Diodes) General Purpose ESD Protection - SP5003 Series Absolute Maximum Ratings Symbol Parameter Value Units I DC Current Per Line 100 mA DC P DC Package Power Rating 0.5 Watts DC T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Channel Resistance R Pins 110, 29, 47 and 56 3.5 5.0 CH V = 1.65VDC Reverse Bias I/O Total Channel Capacitance C 0.8 1.3 pF TOTAL f=1MHz, 30mV AC Reverse Standoff Voltage V 5.0 V RWM Breakdown Voltage V I =1mA 6.0 8.0 10.0 V BR T Forward Voltage at I V I =1mA 0.4 0.7 1.5 V F F F Reverse Leakage Current I V =+3.3V 0.01 0.10 A LEAK Leak Positive (tp=8/20s) 1.36 2 3 Dynamic Resistance R Negative (tp=8/20s) 0.6 DYN TLP, tp=100ns, I/O to GND 0.42 IEC 61000-4-2 (Contact Discharge) 15 kV 1 2 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV Differential Mode Cutoff F Z =50 , Z 50 4.0 GHz 2 3dB SOURCE LOAD Frequency Common Mode Impedance Z 100MHz 32 C Common Mode Stop Band F f=900MHz 16 dB 2 atten Attenuation Notes: 1. ESD zapping at I/O pins (1,2,4,5) with respect to GND. 2. Guaranteed by design. 3. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Differential Mode Attenuation vs. Frequency Common Mode Attenuation vs. Frequency 0 0 1 5 2 10 3 4 15 5 20 6 25 7 30 8 35 9 40 10 1 10 100 1000 10000 1 10 100 1000 10000 Frequency (MHz) Frequency (MHz) 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/23/20 Inser on Loss(dB) Inser on Loss(dB)