TP1.5KE33CA Littelfuse

TVS Diodes Axial Leaded 1500W > TP1.5KE series RoHS Pb e3 TP1.5KE Series Description The TP1.5KE Series is designed specifically to protect Uni-directional sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Bi-directional High reliability application Low incremental surge and automotive grade resistance AEC-Q101 rev D qualified High temperature Glass passivated chip to reflow soldering junction in DO-201 guaranteed: 260C/10sec Agency Approvals Package / 0.375,(9.5mm) lead length, 5 lbs., (2.3kg) 1500W peak pulse Agency Agency File Number tension capability at 10/1000s E230531 waveform, repetition rate V T = V 25C BR J BR (duty cycles):0.01% x (1+T x (T - 25)) J (T:Temperature Fast response time: Coefficient, typical value Maximum Ratings and Thermal Characteristics typically less than 1.0ps O is 0.1%) (T =25 C unless otherwise noted) from 0 Volts to BV min A Plastic package is Excellent clamping Parameter Symbol Value Unit ammabilitfl y rated V-0 per capability Underwriters Laboratories T ypical failure mode is Peak Pulse Power Dissipation by P 1500 W PPM Matte tin leadfree plated 10/1000s Test Waveform (Fig.2)(Note 1) short from over-specified voltage or current Halogen free and RoHS Steady State Power Dissipation on compliant P 6.5 W Whisk er test is conducted D Infinite Heat Sink at T =75C L based on JEDEC Pb-free E3 means 2nd Peak Forward Surge Current, 8.3ms JESD201A per its table 4a level interconnect is Single Half Sine Wave Unidirectional Only I 200 A FSM and 4c Pb-free and the terminal (Note 2) finish material is tin(Sn) IEC 61 000-4-2 ESD Maximum Instantaneous Forward Voltage V 3.5 V (IPC/JEDEC J-STD- F at 100A for Unidirectional Only (Note 3) 30kV(Air), 30kV (Contact) 609A.01) ESD protection of data Operating Junction Temperature Range T -55 to 150 C J lines in accordance with IEC 61000-4-2 Storage Temperature Range T -55 to 175 C STG EFT protection of dat a lines in accordance with Typical Thermal Resistance Junction to R 15 C/W IEC 61000-4-4 JL Lead Typical Thermal Resistance Junction to R 75 C/W JA Ambient Notes: Applications O 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25 C per Fig. 3. J 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. TVS devices are ideal for the protection of I/O interfaces, V bus and other vulnerable circuits used in telecom, CC computer, industrial and consumer electronic applications. Functional Diagram Bi-directional Cathode Anode Uni-directional 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20TVS Diodes Axial Leaded 1500W > TP1.5KE series Electrical Characteristics (T =25C unless otherwise noted) A Maximum Maximum Agency Breakdown Voltage V Part Part Reverse Stand BR Test Clamping Maximum Reverse Approval (Volts) I Number Number off Voltage V T Current Voltage Peak Pulse R Leakage I R (Uni) (Bi) (Volts) I (mA) V I Current I (A) T C pp pp V (A) R MIN MAX (Volts) TP1.5KE12A TP1.5KE12CA 10.20 11.40 12.60 1 16.7 91.0 5 X TP1.5KE13A TP1.5KE13CA 11.10 12.40 13.70 1 18.2 83.5 1 X TP1.5KE15A TP1.5KE15CA 12.80 14.30 15.80 1 21.2 71.7 1 X TP1.5KE16A TP1.5KE16CA 13.60 15.20 16.80 1 22.5 67.6 1 X TP1.5KE18A TP1.5KE18CA 15.30 17.10 18.90 1 25.2 60.3 1 X TP1.5KE20A TP1.5KE20CA 17.10 19.00 21.00 1 27.7 54.9 1 X TP1.5KE22A TP1.5KE22CA 18.80 20.90 23.10 1 30.6 49.7 1 X TP1.5KE24A TP1.5KE24CA 20.50 22.80 25.20 1 33.2 45.8 1 X TP1.5KE27A TP1.5KE27CA 23.10 25.70 28.40 1 37.5 40.5 1 X TP1.5KE30A TP1.5KE30CA 25.60 28.50 31.50 1 41.4 36.7 1 X TP1.5KE33A TP1.5KE33CA 28.20 31.40 34.70 1 45.7 33.3 1 X TP1.5KE36A TP1.5KE36CA 30.80 34.20 37.80 1 49.9 30.5 1 X TP1.5KE39A TP1.5KE39CA 33.30 37.10 41.00 1 53.9 28.2 1 X TP1.5KE43A TP1.5KE43CA 36.80 40.90 45.20 1 59.3 25.6 1 X TP1.5KE47A TP1.5KE47CA 40.20 44.70 49.40 1 64.8 23.5 1 X I-V Curve Characteristics Uni-directional Bi-directional Ipp IT IR Vc VBRVR V Vc VBR VR IR V VRVBRVc IR VF IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I ) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/16/20