TP5KP58CA Littelfuse

TVS Diodes Axial Leaded 5 kW > TP5KP series Pb e3 RoHS TP5KP Series Description The TP5KP Series is designed specifically to protect Uni-directional sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Bi-directional Hi reliability application Low incremental surge and automotive grade AEC resistance Q101 qualified Typical I less than 2A R Glass passivated chip when V min>12V BR junction in P600 package High temperature Agency Approvals 5 kW peak pulse to reflow soldering capability at 10/1000s guaranteed: 260C/10sec AGENCY AGENCY FILE NUMBER waveform, repetition rate / 0.375, (9.5mm) lead E230531 (duty cycles):0.01% length, 5 lbs., (2.3kg) tension Fast response time: typically less than 1.0ps V T = V 25C BR J BR Maximum Ratings and Thermal Characteristics from 0 Volts to V min x (1+T x (T - 25)) O BR J (T =25 C unless otherwise noted) A (T:Temperature Excellent clamping Coefficient, typical value capability Parameter Symbol Value Unit is 0.1%) T ypical failure mode is Peak Pulse Power Dissipation by UL Recognized compound short from over-specified 10/1000s Test Waveform (Fig.2) P 5 kW PPM meeting flammability voltage or current (Note 1) rating V-0 Whisk er test is conducted Steady State Power Dissipation on P 8.0 W Matte tin leadfree plated D based on JEDEC Infinite Heat Sink at T =75C L JESD201A per its table 4a Halogen free and RoHS Peak Forward Surge Current, 8.3ms and 4c compliant Single Half Sine Wave Unidirectional I 400 A FSM Only (Note 2) nd IEC-61 000-4-2 ESD Pb-free E3 means 2 level Maximum Instantaneous Forward 30kV(Air), 30kV (Contact) interconnect is Pb-free Voltage at 100A for Unidirectional V 3.5 V F and the terminal finish EFT protection of dat a Only (Note 3) material is tin(Sn) (IPC/ lines in accordance with Operating Junction Temperature T -55 to 150 C JEDEC J-STD-609A.01) J IEC 61000-4-4 Range Storage Temperature Range T -55 to 175 C STG Typical Thermal Resistance Junction 8.0 C/W R JL to Lead Typical Thermal Resistance Junction Applications R 40 C/W JA to Ambient TVS Components are ideal for the protection of I/O Notes: interfaces, V bus and other vulnerable circuits used in CC O 1. Non-repetitive current pulse per Fig. 4 and derated above T (initial) =25 C per Fig. 3. J telecom, computer, industrial and consumer electronic 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per applications. minute maximum. Functional Diagram Bi-directional Cathode Anode Uni-directional 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18TVS Diodes Axial Leaded 5 kW > TP5KP series Electrical Characteristics (T =25C unless otherwise noted) A Maximum Maximum Maximum Breakdown Test Reverse Agency Reverse Part Part Clamping Peak Voltage V BR Current Stand off Recognition Leakage Number Number Voltage Pulse (Volts) I I Voltage V T T R I V (Uni) (Bi) V I Current I R R C PP PP (Volts) (mA) MIN MAX (V) (A) ( A) TP5KP11A TP5KP11CA 11.0 12.20 13.50 5 18.2 280.2 2 X TP5KP12A TP5KP12CA 12.0 13.30 14.70 5 19.9 256.3 2 X TP5KP13A TP5KP13CA 13.0 14.40 15.90 5 21.5 237.2 2 X TP5KP14A TP5KP14CA 14.0 15.60 17.20 5 23.2 219.8 2 X TP5KP15A TP5KP15CA 15.0 16.70 18.50 5 24.4 209.0 2 X TP5KP16A TP5KP16CA 16.0 17.80 19.70 5 26.0 196.2 2 X TP5KP17A TP5KP17CA 17.0 18.90 20.90 5 27.6 184.8 2 X TP5KP18A TP5KP18CA 18.0 20.00 22.10 5 29.2 174.7 2 X TP5KP20A TP5KP20CA 20.0 22.20 24.50 5 32.4 157.4 2 X TP5KP22A TP5KP22CA 22.0 24.00 26.90 5 35.5 143.7 2 X TP5KP24A TP5KP24CA 24.0 26.70 29.50 5 38.9 131.1 2 X TP5KP26A TP5KP26CA 26.0 28.90 31.90 5 42.1 121.1 2 X TP5KP28A TP5KP28CA 28.0 31.10 34.40 5 45.4 112.3 2 X TP5KP30A TP5KP30CA 30.0 33.30 36.80 5 48.4 105.4 2 X TP5KP33A TP5KP33CA 33.0 36.70 40.60 5 53.3 95.7 2 X TP5KP36A TP5KP36CA 36.0 40.00 44.20 5 58.1 87.8 2 X TP5KP40A TP5KP40CA 40.0 44.40 49.10 5 64.5 79.1 2 X TP5KP43A TP5KP43CA 43.0 47.80 52.80 5 69.4 73.5 2 X TP5KP45A TP5KP45CA 45.0 50.00 55.30 5 72.7 70.2 2 X TP5KP48A TP5KP48CA 48.0 53.30 58.90 5 77.4 65.9 2 X TP5KP51A TP5KP51CA 51.0 56.70 62.70 5 82.4 61.9 2 X TP5KP54A TP5KP54CA 54.0 60.00 66.30 5 87.1 58.6 2 X TP5KP58A TP5KP58CA 58.0 64.40 71.20 5 93.6 54.5 2 X TP5KP60A TP5KP60CA 60.0 66.70 73.70 5 96.8 52.7 2 X I-V Curve Characteristics Uni-directional Bi-directional Ipp IT IR Vc VBRVR V Vc VBR VR IR V VRVBRVc IR VF IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I ) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/07/18