TVS Diode Datasheet TP6KE Series Axial Leaded 600W RoHS Pb e3 Description Bi-directional The AEC-Q101 qualified TP6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features & Benefits Hi reliability application and EFT protection of data lines in Uni-directional automotive grade AEC-Q101 accordance with IEC 61000-4- qualified 4 (IEC801-4) Glass passivated chip junction Low incremental surge in DO-15 Package resistance 600W peak pulse capability High temperature to reflow at 10/1000s waveform, soldering guaranteed: repetition rate (duty 260C/40sec / 0.375,(9.5mm) cycles):0.01% lead length, 5 lbs., (2.3kg) Additional Information tension Fast response time: typically less than 1.0ps from 0 Volts to VBR TJ= VBR 25C x (1+T BV min x (TJ - 25))(T:Temperature Coefficient, typical value is Excellent clamping capability 0.1%) T ypical failure mode is short Plastic package has from over-specified voltage or underwriters laboratory current Resources Accessories Samples ammabilitfl y classification 94V- Whisker test is conducted O based on JEDEC JESD201A Lead-free matte tin plated per its table 4a and 4c package IEC-61000-4-2 ESD 30kV(Air), Agency Approvals Halogen free and RoHS 30kV (Contact) compliant ESD protection of dat a lines in Agency Agency File Number accordance with IEC 61000-4- E230531 2 (IEC801-2) Maximum Ratings and Thermal Characteristics Applications O (T =25 C unless otherwise noted) A TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial Parameter Symbol Value Unit and consumer electronic applications. Peak Pulse Power Dissipation by 10/1000s Test Waveform (Fig.2) P 600 W PPM (Note 1) Steady State Power Dissipation on P 5.0 W Functional Diagram D Infinite Heat Sink at T =75C (Fig. 6) L Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional I 100 A FSM Only (Note 2) Maximum Instantaneous Forward V 3.5 V F Bi-directional Voltage at 50A for Unidirectional Only Operating Junction and Storage T , T -55 to 175 C J STG Temperature Range Cathode Anode Typical Thermal Resistance Junction R 20 C/W uJL to Lead Uni-directional Typical Thermal Resistance Junction R 75 C/W uJA to Ambient Notes: O 1. Non-repetitive current pulse, per Fig. 4 and derated above T (initial) = 25 C per Fig. 3. J 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 2021 Littelfuse, Inc. 1 Specifications are subject to change without notice. Revised: GD. 06/10/21TVS Diode Datasheet TP6KE Series Axial Leaded 600W Electrical Characteristics (T =25C unless otherwise noted) A Maximum Breakdown Test Maximum Maximum Agency Part Part Reverse Stand Reverse Voltage V BR Current Clamping Peak Approval Number Number off Voltage V Leakage R (Volts) I I Voltage Pulse Current T T (Uni) (Bi) (Volts) I V R R V I (V) I (A) (mA) C pp pp MIN MAX (A) TP6KE13A TP6KE13CA 11.10 12.40 13.70 1 18.2 33.5 1 X TP6KE15A TP6KE15CA 12.80 14.30 15.80 1 21.2 28.8 1 X TP6KE16A TP6KE16CA 13.60 15.20 16.80 1 22.5 27.1 1 X TP6KE18A TP6KE18CA 15.30 17.10 18.90 1 25.2 24.2 1 X TP6KE20A TP6KE20CA 17.10 19.00 21.00 1 27.7 22.0 1 X TP6KE22A TP6KE22CA 18.80 20.90 23.10 1 30.6 19.9 1 X TP6KE24A TP6KE24CA 20.50 22.80 25.20 1 33.2 18.4 1 X TP6KE27A TP6KE27CA 23.10 25.70 28.40 1 37.5 16.3 1 X TP6KE30A TP6KE30CA 25.60 28.50 31.50 1 41.4 14.7 1 X TP6KE33A TP6KE33CA 28.20 31.40 34.70 1 45.7 13.3 1 X TP6KE36A TP6KE36CA 30.80 34.20 37.80 1 49.9 12.2 1 X TP6KE39A TP6KE39CA 33.30 37.10 41.00 1 53.9 11.3 1 X TP6KE43A TP6KE43CA 36.80 40.90 45.20 1 59.3 10.3 1 X TP6KE47A TP6KE47CA 40.20 44.70 49.40 1 64.8 9.4 1 X TP6KE51A TP6KE51CA 43.60 48.50 53.60 1 70.1 8.7 1 X TP6KE56A TP6KE56CA 47.80 53.20 58.80 1 77.0 7.9 1 X TP6KE62A TP6KE62CA 53.00 58.90 65.10 1 85.0 7.2 1 X TP6KE68A TP6KE68CA 58.10 64.60 71.40 1 92.0 6.6 1 X TP6KE75A TP6KE75CA 64.10 71.30 78.80 1 103.0 5.9 1 X TP6KE82A TP6KE82CA 70.10 77.90 86.10 1 113.0 5.4 1 X TP6KE91A TP6KE91CA 77.80 86.50 95.50 1 125.0 4.9 1 X For parts without A , the V is 10% and V is 5% higher than with A parts BR C I-V Curve Characteristics Uni-directional Bi-directional Ipp IT IR Vc VBRVR Vc VBR VR V V IR IR VF VRVBRVc IT IT Ipp Ipp P Peak Pulse Power Dissipation -- Max power dissipation PPM V Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation R V Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I ) BR T V Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) C I Reverse Leakage Current -- Current measured at V R R V Forward Voltage Drop for Uni-directional F 2021 Littelfuse, Inc. 2 Specifications are subject to change without notice. Revised: GD. 06/10/21