CKS1458 Lorlin

CKS ROTARY SWITCH CKS IP66/IP67 SEALED ROTARY SWITCH ELECTRICAL & MECHANICAL SPECIFICATION Switch Rating: 1A 24V dc Life: >10,000 Cycles Proof Voltage: 1,500V ac (Initial) Operating Torque (nominal): Standard 8.6 1 cNm Insulation Resistance: >999 M at 500V dc (Initial) Light Action 3.5 0.5 cNm Contact Resistance <20 m (Initial) End Stop Torque (nominal): 0.80 Nm Contact/Terminal Material: Brass CZ108 Ag Plated Moulding Material: Polyamide 6.6 G.F Operating Temperature: -30C to +85C FEATURES Protected against water ingress from powerful water jets or temporary immersion in water of one meter depth Single wafer switch Shorting (make before break 30 indexing only) Dampened indexing and reduced shaft play or non-shorting (break before make) gives smooth feel Maximum 12 positions Moulded stop or adjustable stops to Solder or PCB terminals Up to 4 poles per switch restrict number of positions Gold flashed or gold plated terminals/ contacts available Continuous rotation also available Standard 30 indexing, 60 and 90 available Spindles with special flats, slots or knurls Made in UK Rear drive versions Moulded 27.5mm UL-V0 rated material available No bush versions diameter IMPORTANT Wafers flats and slots shown as viewed from the front of the switch in the furthest anti- clockwise position ORDERING CODE FOR NON-STANDARD SWITCHES Nb. There is also a specification drawing sheet at the end