0910 ASL 135 Lumberg

AS-Interface Module with 4-Digital Inputs and 4-Digital Outputs 4 IN / 4 OUT 0910 ASL 135 AS-Interface module with 4 digital inputs to connect standard sensors and 4 digital outputs to connect standard actuators, combined M12 socket, M12 bus connection. Replaces module 0910 ASL 109 - Bit Assignment Diagnostic Indication Bit - - - - 3 2 1 0 LED Indication Condition O-1..4 / O-4..4 yellow channel status M12 Input U-AS-i green AS-Interface power supply active Byte 0 - - - - I-4 I-3 I-2 I-1 green actuator supply active AUX M12 Output Byte 0 - - - - O-4 O-3 O-2 O-1 Pin AssignmentsPin Assignments Bus connection M12 Input M12 Output M12 1 = AS-Inerface + 1 = +24 V 1 = n.c. 2 = 0 V AUX 2 = IN 2 = n.c. 3 = AS-Interface - 3 = GND (0 V) 3 = GND (0 V) 4 = +24 V AUX 4 = IN 4 = OUT 5 = n.c. 5 = earth 1.800.Belden1 1-717-217-2299www.lumberg-automationusa.com www.lumberg-automationusa.com 30AS-Interface Be Certain with Belden AS-Interface Module with 4-Digital Inputs and 4-Digital Outputs 0910 ASL 135 Technical Data Outputs Type 2 A acc. to IEC 61131-2 Rated output current 2 A per channel Environmental Short circuit-proof yes Degree of protection IP 67 Max. output current 4 A per module Operating temperature range -25C (-13F) to +80C (+176F) Overload-proof yes Weight 200 g Number of digital channels 4 Housing material PUR Channel type N.O. p-switching Channel status indicator LED yellow per channel Bus system AS-Interface Version 2.1 AS-Interface profile S 7.A.E Diagnostic I/O configuration 7 hex Indication LED red ID code 0 hex ID2 code (extended ID-code) F hex Connection via cordset, double-ended Support A/B addressing yes M12 / M12 0915 034 101/... M Electronics power supply AS-Interface Included in delivery / Accessories Rated voltage AS-Interface net Dust covers M12 2 pieces Voltage range 26.531.6 V DC Attachable label 10 pieces Power consumption max. 250 mA Reverse polarity protection yes Indication LED green Input power supply Voltage range (AS-Interface net) 1730 V Total current of all sensors max. 200 mA Short circuit-proof yes Inputs Type 2 acc. to IEC 61131-2 Rated input voltage 24 V DC Signal state 1 Us > 11 V / Is > 6 mA Signal state 0 Is < 2 mA Input current at 24 V 15 mA Input circuit p-switching Number of digital channels 4 Channel status indicator LED yellow per channel Output power supply AUX Rated voltage 24 V DC Voltage range 1030 V Potential separation present Reverse polarity protection yes/electronic Indication LED green Part Number 0910 ASL 135 The application of these products in harsh environments should always be checked before use. Specifications subject to alteration. 1.800.Belden1 www.lumberg-automationusa.com www.lumberg-automationusa.com 1-717-217-2299 31