Chip Monolithic Ceramic Capacitor for General GRM155R61E225ME15 (0402, X5R:EIA, 2.2uF, DC25V) : packaging code Reference Sheet 1.Scope This product specification is applied to Chip Monolithic Ceramic Capacitor used for General Electronic equipment. 2.MURATA Part NO. System (Ex.) GRM 15 5 R6 1E 225 M E15 D (4)Rated (6)Capacitance (7)Muratas (1)L/W (2)T (3)Temperature (5)Nominal (8)Packaging Voltage Tolerance Control Code Dimensions Dimensions Characteristics Capacitance Code 3. Type & Dimensions (Unit:mm) (1)-1 L (1)-2 W (2) T e g 1.00.2 0.50.2 0.50.05 0.15 to 0.35 0.3 min. 4.Rated value (3) Temperature Characteristics Specifications and Test (4) (6) (Public STD Code):X5R(EIA) (5) Nominal Methods Rated Capacitance Capacitance (Operating Temp. coeff Temp. Range Voltage Tolerance Temp. Range) orCap. Change (Ref.Temp.) -55 to 85 C -15 to 15 % DC 25 V 2.2 uF 20 % -55 to 85 C (25 C) 5.Package mark (8) Packaging Packaging Unit f180mm Reel D 10000 pcs./Reel PAPER W8P2 f330mm Reel J 50000 pcs./Reel PAPER W8P2 Product specifications in this catalog are as of Mar.5,2016,and are subject to change or obsolescence without notice. Please consult the approval sheet before ordering. Please read rating and Cautions first. GRM155R61E225ME15-01 1 Specifications and Test Methods Test Method Item Specification No (Ref. Standard:JIS C 5101, IEC60384 1 Rated Voltage Shown in Rated value. The rated voltage is defined as the maximum voltage which may be applied continuously to the capacitor. P-P O-P When AC voltage is superimposed on DC voltage, V or V , whichever is larger, should be maintained within the rated voltage range. 2 Appearance No defects or abnormalities. Visual inspection. 3 Dimension Within the specified dimensions. Using calipers. (GRM02 size is based on Microscope) 4 Voltage proof No defects or abnormalities. Measurement Point :Between the terminations Test Voltage : 250% of the rated voltage Applied Time : 1 to 5 s Charge/discharge current : 50mA max. 5 Insulation Resistance(I.R.) More than 50 F Measurement Point : Between the terminations Measurement Voltage : DC Rated Voltage Charging Time : 1 min Charge/discharge current : 50mA max. Measurement Temperature :R oom Temperature 6 Capacitance Shown in Rated value. Measurement Temperature :Room Temperature Capacitance Frequency Voltage 7 Dissipation Factor (D.F.) B1,R1,B3,R6,R7,C6,C7,C8,E7,D7 : 0.1 max. *1 C10F 1.0+/-0.1kHz 1.0+/-0.2Vrms *Table 1 D8,GRM31CR60J107 : 0.15 max (10V min.) GRM033 B3/R6 1A 123 to 823 *2 C10F GRM31CR71E106 : 0.125 1.0+/-0.1kHz 0.5+/-0.1Vrms GRM033 B3/R6 1A 104 (6.3V max.) max GRM033 R6 1A 224 GRM153 B3/R6 1A 105 C10F 120+/-24Hz 0.5+/-0.1Vrms GRM155 B3/R6 1A 124 to 105 GRM155 B3/R6 1A 225 GRM185 B3/R6 1C/1A 105 *1 For items listed in Table 1 on the left, the capacitance should GRM185 C8/D7 1A 105 be measured using a voltage of 0.5+/-0.1Vrms instead of GRM188 B3/R6 1C/1A 225 GRM188 R7/C8/D7 1A 225 1.0+/-0.2Vrms. GRM188 B3/R6 1A 335 *2 For item GRM188R70J105, the capacitance should be measured GRM219 B3/R6 1C/1A 475 GRM219 C8 1A 475 using a voltage of 1.0+/-0.2Vrms instead of 0.5+/-0.1Vrms. GRM219 B3/R6 1A 106 GRM21B B3/R6 1C/1A 106 GRM21B R7/C8 1A 106 GRM319 B3/R6 1C/1A 106 8 Temperature No bias B1,B3 : Within +/-10% (-25C to +85C) The capacitance change should be measured after 5 min. Characteristics R1,R7 : Within +/-15% (-55C to +125C) at each specified temp. stage. of Capacitance R6 : Within +/-15% (-55C to +85C) In case of applying voltage, the capacitance change should be C6 : Within +/-22% (-55C to +85C) measured after 1 min. with applying voltage in equilibration of C7 : Within+/-22% (-55C to +125C) each temp. stage. C8 : Within +/-22% (-55C to +105C) Capacitance value as a reference is the value in step 3. E7 : Within +22/-56% (-55C to +125C) D7 : Within +22/-33% (-55C to +125C) Measurement Voltage : 0.20+/-0.05Vrms D8 : Within +22/-33% (-55C to +105C) Applying Voltage(VDC) Step Temperature(C) 1 Reference Temp.+/-2 2 Min.Operating Temp. +/-3 No bias 3 Reference Temp. +/-2 50% of B1: Within +10/-30% 4 Max.Operating Temp. +/-3 the rated R1: Within +15/-40% 5 Reference Temp. +/-2 voltage 50% of 6 Min.Operating Temp. +/-3 the rated voltage 7 Reference Temp. +/-2 (For B1,R1) 8 Max.Operating Temp.+/-3 Initial measurement Perform a heat treatment at 150+0/-10C for 1h and then let sit for 24+/-2h at room temperature,then measure. 9 Adhesive Strength No removal of the terminations or other defect Solder the capacitor on the test substrate shown in Fig.3. of Termination should occur. Type Applied Force(N) GRM02 1 GRM03 2 GRM15/GRM18 5 GRM21/GRM31/GRM32 10 Holding Time : 10+/-1s Applied Direction : In parallel with the test substrate and vertical with the capacitor side. JEMCGS-01735C 2 These Part Numbers are designed for use in the circuits w here continuous applied voltage to the capacitor is derated than rated voltage, and guarantee Durability Test w ith 100% rated voltage as testing voltage at the maximum operating temperature. The voltage and temperature derating conditions on the left are recommended for use to ensure the same reliability level as normal specification. Chip Capacitor Land a Solder Resist b c