XR33202EEHB-F MaxLinear

XR33202 Wide Supply RS-485/RS-422 Transceiver with 1.65V-5.5V I/O Interface Description FEATURES The XR33202 is a high performance RS-485/RS-422 transceiver Wide 3.0V to 5.5V supply operation designed to meet the increasing system requirements found in 1.65V to 5.5V I/O logic interface VL pin Enhanced receiver fail-safe protection for todays portable/handheld, process control and industrial equipment open, shorted or terminated but idle environments. This is a wide supply (3.0V to 5.5V) device that operates data lines at maximum data rate of 20Mbps and features a 1.65V to 5.5V I/O logic Max data rate of 20Mbps supply, simplifying multi-voltage system interfacing requirements. 1/8 unit load, up to 256 receivers The receiver includes full fail-safe circuitry, guaranteeing a logic- Hot swap glitch protection on DE and RE Pins high receiver output when the receiver inputs are open, shorted or Robust ESD (Electrostatic Discharge) undriven. The XR33202 receiver input impedance is at least 96k protection for RS-485 bus pins (1/8 unit load), allowing more than 256 devices on the bus. 15kV human body model The driver is protected by short circuit detection as well as thermal 15kV IEC61000-4-2 air discharge shutdown and maintains high impedance in shutdown or when 8kV IEC61000-4-2 contact discharge powered off. The XR33202 does not have slew limiting and is intended Driver short circuit limit and thermal for high speed applications requiring data rates up to 20Mbps. shutdown for overload protection The DE and RE pins include hot swap circuitry to prevent false -40C to 125C ambient operating transitions on the bus during power up or live insertion and can enter temperature range a 1A low current shutdown mode for extreme power savings. Lead-free (RoHS 6) DFN The XR33202 is a half-duplex device that operates at max data rates APPLICATIONS of 20Mbps. It is available in a 10-pin DFN package. Portable and handheld equipment Industrial and process control equipment Point-of-sale equipment Building security and automation Typical Application 2.5V 3.3V 3.3V 1.8V 1.8V 2.5V V V CC CC V V V V L CC CC L TX DI DI TX MICRO DE DE UART RX R R RX PROCESSOR 120 120 RE RE XR33202 XR33202 Figure 1. Typical Application REV2B 1/16XR33202 Absolute Maximum Ratings Operating Conditions Stresses beyond those listed under Absolute Maximum Operating temperature range ...................... -40C to 125C Ratings may cause permanent damage to the device. V supply range .............................................3.0V to 5.5V CC Exposure to any Maximum Rating condition for extended V I/O supply range (V V ) ......................1.65V to 5.5V L L CC periods may affect device reliability and lifetime. Supply voltage (V ) ...................................... -0.3V to 7.0V CC Thermal Information ........................................................................40.5C/W JA Logic interface voltage (V ) ...................................V V L L CC ..........................................................................8.5C/W JC Junction temperature ................................................. 150C Input voltage DE and DI ....................................................... -0.3V to 6.0V RE .........................................................-0.3V to (V + 0.3V) L Output voltage ......................................-0.3V to (V + 0.3V) L Driver output voltage A/Y, B/Z .....................................18V Receiver input voltage A/Y, B/Z ...................................18V ESD Ratings HBM - Human Body Model (RS-485 bus pins A/Y, B/Z) ....................................... 15kV HBM - Human Body Model (all other pins) .................. 4kV IEC61000-4-2 Air Discharge (RS-485 bus pins A/Y, B/Z) ....................................... 15kV IEC61000-4-2 Contact Discharge (RS-485 bus pins A/Y, B/Z) ......................................... 8kV REV2B 2/16