16W Single Output Switching Power Supply APC-16E series IP42 ( 76( 5 ( 1 )) ( 6 8 9 ) * 12 : , % 6 9 ) ( < ) 9 = ( 9 %& ( )) * + * * ( ( ( ) . / 0 ( 12 3 ( 4%& ) * ) ( 5 5 6 File Name:APC-16E-SPEC 2016-08-0616W Single Output Switching Power Supply APC-16E series SPECIFICATION MODEL APC-16E-350 APC-16E-700 RATED CURRENT 350mA 700mA DC VOLTAGE RANGE 12~48V 9~24V RATED POWER 16.8W 16.8W RIPPLE & NOISE (max.)Note.2 300mVp-p 250mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 5.0% CURRENT ACCURACY 8.0% LINE REGULATION 1.0% LOAD REGULATION 3.0% SETUP, RISE TIME 500ms, 200ms / 230VAC at full load HOLD UP TIME (Typ.) 20ms/230VAC at full load VOLTAGE RANGE Note.4 180 ~ 264VAC 254 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.5/230VAC at full load EFFICIENCY(Typ.) 83% 82% AC CURRENT 0.3A/230VAC INPUT INRUSH CURRENT(Typ.) COLD START 45A(twidth=210s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 13 units (circuit breaker of type B) / 23 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT 0.25mA / 240VAC 27.6~ 33.5V 50.4~ 60V PROTECTION OVER VOLTAGE Protection type : Shut off o/p voltage, clamping by zener diode -30 ~ 70(Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY ENVIRONMENT TEMP. COEFFICIENT 0.2%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS ENEC EN61347-1, EN61347-2-13, EN62384, IP42 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE EMC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH (Note 5) EMC EMISSION Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3 Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11 light industry level(surge 2KV), criteria A EMC IMMUNITY MTBF 1145.7K hrs min. MIL-HDBK-217F (25) 77*40*29(L*W*H) OTHERS DIMENSION 0.1Kg 120pcs/14Kg/1.06CUFT PACKING :5> & * , ) 9 NOTE A=8 ) 9 ( 9 B ( ) %- ) + > 7 * % 9 ( C ( ( ) , >( ( 9 9 ( ) . 6 A ) 9 )) 9 ( * ( ) . ) . ) A ( File Name: APC-16E-SPEC 2016-08-06