8W Single Output Switching Power Supply APC-8 series / 2 IP42 5 ( 0 ( ) 01 0 & 4 6 7 ( 84 9 * < 7 = 7 %& ( ) ) + ) ) ( ) - . / 01 2 & ) ( 3 3 4 File Name:APC-8-SPEC 2016-08-068W Single Output Switching Power Supply APC-8 series SPECIFICATION MODEL APC-8-350 APC-8-500 APC-8-700 APC-8-250 RATED CURRENT 250mA 350mA 500mA 700mA OPERATING VOLTAGE RANGE Note.4 16~32V 11~23V 8~16V 6~11V RATED POWER 8W 8.05W 8W 7.7W 300mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 350mVp-p 300mVp-p OUTPUT 24V 17V NO LOAD OUTPUT VOLTAGE(max.) 38V 29V CURRENT ACCURACY 8.0% 500ms, 180ms / 230VAC 3000ms, 150ms / 115VAC at full load SETUP, RISE TIME HOLD UP TIME (Typ.) 20ms/230VAC at full load 90 ~ 264VAC 127 ~ 370VDC (Note.5) VOLTAGE RANGE Note.3 FREQUENCY RANGE 47 ~ 63Hz 82.5% 81.5% 81% 80% EFFICIENCY(Typ.) INPUT AC CURRENT 0.15A/230VAC 0.3A/115VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=120s measured at 50% Ipeak) at 230VAC 0.25mA / 240VAC LEAKAGE CURRENT PROTECTION Hiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUIT -30 ~ 70(Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.2%/ (0 ~45) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750,CSA C22.2 No.250.0-08 approved design refer to EN60950-1,EN61347-1,EN61347-2-13 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & EMC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH ISOLATION RESISTANCE (Note 5) EMC EMISSION Compliance to EN55022,EN61000-3-2 Class A,EN61000-3-3 Compliance to EN55024,EN61000-4-2,3,4,5,6,8,11 light industry level(surge 2KV), criteria A EMC IMMUNITY MTBF 2275.8K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 60*30*23.5mm(L*W*H) 0.09Kg 144pcs/14Kg/0.75CUFT PACKING 93> ) * 7 NOTE A=6 7 7 B &, + 7 ( ) C & < < ( > 7 ) 7 - * ( ) 7 ( 7 ( % > 7 7 5 C 7 , > /1D * &) 1D * ) 1D ,,&+ 1D ,% * 2 A 9 File Name: APC-8-SPEC 2016-08-06