8W Single Output Switching Power Supply APC-8E series IP42 ( ) 01 & ( 0 ( 5 6 7 & 85( 9 : * 0 * < 7 = ( 7 % & ( * )+* )* , ) & ) ( ( ( - . / ( 01 2 ( 3 % ) ( & 4 4 5 File Name:APC-8E-SPEC 2016-05-048W Single Output Switching Power Supply APC-8E series SPECIFICATION MODEL APC-8E-350 APC-8E-500 APC-8E-700 APC-8E-250 RATED CURRENT 250mA 350mA 500mA 700mA OPERATING VOLTAGE RANGE Note.4 16~32V 11~23V 8~16V 6~11V RATED POWER 8W 8.05W 8W 7.7W 300mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 350mVp-p 300mVp-p OUTPUT 24V 17V NO LOAD OUTPUT VOLTAGE(max.) 38V 29V CURRENT ACCURACY 8.0% 500ms, 180ms / 230VAC SETUP, RISE TIME HOLD UP TIME (Typ.) 20ms/230VAC at full load 180 ~ 264VAC 254 ~ 370VDC (Note.5) VOLTAGE RANGE Note.3 FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.5/230VAC at full load 81.5% 80.5% 79% 77.5% EFFICIENCY(Typ.) INPUT AC CURRENT 0.15A/230VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=120s measured at 50% Ipeak) at 230VAC 0.25mA / 240VAC LEAKAGE CURRENT PROTECTION Hiccup mode, recovers automatically after fault condition is removed. SHORT CIRCUIT -30 ~ 70(Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.2%/ (0 ~45) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS ENEC EN61347-1,EN61347-2-13,EN62384 approved design refer to UL8750,CSA C22.2 No.250.0-08 EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & EMC I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH ISOLATION RESISTANCE (Note 5) EMC EMISSION Compliance to EN55015,EN61000-3-2 Class A,EN61000-3-3 Compliance to EN61547,EN61000-4-2,3,4,5,6,8,11 light industry level(surge 2KV), criteria A EMC IMMUNITY MTBF 2275.8K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 60*30*23.5(L*W*H) 0.09Kg 144pcs/14Kg/0.75CUFT PACKING 94> + % ) * 7 NOTE A=6 7 ( 7 B ( , + 7 & ) ( C ( ( ( * < < & >( ( 7 ) 7 - * ( & ) ( 7 ( & ( 7 ( & File Name: APC-8E-SPEC 2016-05-04