100W Single Output Switching Power Supply CLG -100 s e ri e s Features : Universal AC input / Full range Protections:Short circuit/Over load/Over voltage/Over temperature Built-in active PFC function IP67 design for indoor or outdoor installations UL1310 Class 2 power unit Cooling by free air convection 100% full load burn-in test High realibility Suitable for LED lighting and moving sign applications 3 years warranty (Note.7) ( for 48V only) ( except for 48V ) IP67 SPECIFICATION MODEL CLG-100-12 CLG-100-15 CLG-100-20 CLG-100-24 CLG-100-27 CLG-100-36 CLG-100-48 DC VOLTAGE 12V 15V 20V 24V 27V 36V 48V RATED CURRENT Note.6 5A 5A 4.8A 4A 3.55A 2.65A 2A CURRENT RANGE Note.6 0 ~ 5A 0 ~ 5A 0 ~ 4.8A 0 ~ 4A 0 ~ 3.55A 0 ~ 2.65A 0 ~ 2A RATED POWER Note.6 60W 75W 96W 96W 95.85W 95.4W 96W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE Fixed. Can be modified between 0% ~ -15% rated output voltage OUTPUT CURRENT ADJ. RANGE Fixed. Can be modified between 3% ~ -25% rated output current VOLTAGE TOLERANCE Note.3 3.0% 3.0% 3.0% 3.0% 3.0% 2.0% 2.0% LINE REGULATION 1.0% LOAD REGULATION 2.0% SETUP, RISE TIME 1200ms, 80ms / 230VAC 1200ms, 80ms / 115VAC at full load HOLD TIME (Typ.) 60ms / 230VAC 30ms / 115VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 83% 85% 87% 87% 87% 87% 87% AC CURRENT 12V:0.8A/115VAC 0.4A/230VAC 15V:0.9A/115VAC 0.45A/230VAC 20V ~ 48V:1.1A/115VAC 0.55A/230VAC INRUSH CURRENT(max.) COLD START 40A/230VAC LEAKAGE CURRENT 0.5mA / 240VAC 95 ~ 100% OVER CURRENT Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed 13 ~ 16V 16.5 ~ 20V 22 ~ 27V 27 ~ 34V 29 ~ 36V 39 ~ 48V 52 ~ 64V PROTECTION OVER VOLTAGE Protection type : Shut down and latch off o/p voltage, re-power on to recover 90 10 (RTH2) OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to output load derating curve), -40 possible WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80 , 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1310 Class 2, TUV EN60950-1, CAN/CSA C22.2 No. 223-M91(except for 48V),IP67 Approved WITHSTAND VOLTAGE I/P-O/P:4.25KVDC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms/500VDC EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 ENV50204, EN55024, Light industry level, criteria A MTBF 301Khrs min. MIL-HDBK-217F (25 ) OTHERS DIMENSION 222*68*39mm (L*W*H) 1.0Kg 12pcs/13Kg/0.49CUFT PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. NOTE 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Please refer to OLP characteristics. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. 6. This is the maximum possible output current and power, over load protection may be activated slightly below this level to comply with the requirement of UL1310 class 2. 7. 3 years warranty is guaranteed for operating ambient temperature no higher than 68 . File Name:CLG-100-SPEC 2006-08-30100W Single Output Switching Power Supply CLG -100 s e ri e s Mechanical Specification Case No. 954A Unit:mm 222.2 12 198.2 9.6 300 20 300 20 L(Brown) +V(Red) N(Blue) -V(Black) FG(Greed/Yellow) 18AWG 3C 18AWG 2C 4.2 4PL Fosc : 100KHz Block Diagram POWER RECTIFIERS EMI FILTER PFC +V I/P & SWITCH- & CIRCUIT -V RECTIFIERS ING FILTER O.L.P. DETECTION FG O.L.P. PWM & PFC CIRCUIT PFC CONTROL CONTROL O.V.P. OLP Characteristics 110000 5500 (max.) 0 50 95 (Vo Io<100VA) IO(%) Derating Curve Static Characteristics fosc : 100KHz 100 100 90 80 80 70 60 60 40 50 20 40 -30 -25 -5 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175 180 200 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:CLG-100-SPEC 2006-08-30 LOAD (%) VO (%) 9.4 34.2 9.4 68 LOAD (%) 38.75