150W Single Output Switching Power Supply CLG-150 series : ( : > < - : 2 + < B 9 ( ( ( + ( & 9 87 4 4 + , + 4 + .. IP65 IP67 % & ( & ) % ( SPECIFICATION MODEL CLG-150-12 CLG-150-15 CLG-150-20 CLG-150-24 CLG-150-30 CLG-150-36 CLG-150-48 DC VOLTAGE 12V 15V 20V 24V 30V 36V 48V CONSTANT CURRENT REGION Note.4 9 ~12V 11.25 ~ 15V 15 ~ 20V 18 ~ 24V 22.5 ~ 30V 27 ~ 36V 36 ~ 48V RATED CURRENT 11A 9.5A 7.5A 6.3A 5A 4.2A 3.2A RATED POWER 132W 142.5W 150W 151.2W 150W 151.2W 153.6W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.6 9 ~ 13V 13 ~ 17V 17 ~ 22V 22 ~ 27V 26 ~ 32V 31 ~ 41V 40 ~ 56V OUTPUT Can be adjusted by internal potentiometer A type and C type only CURRENT ADJ. RANGE 5.5 ~ 11A 4.75 ~ 9.5A 3.75 ~ 7.5A 3.15 ~ 6.3A 2.5 ~ 5A 2.1 ~ 4.2A 1.6 ~ 3.2A VOLTAGE TOLERANCE Note.3 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 3000ms, 80ms/115VAC 500ms, 80ms/230VAC at full load HOLD UP TIME (Typ.) 50ms / 230VAC 16ms / 115VAC at full load VOLTAGE RANGE Note.5 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load (Please refer toPower Factor Characteristi curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading75% at 115VAC/230VAC input and output loading 75% at 277VAC input INPUT EFFICIENCY (Typ.) 88% 88% 90% 90% 91% 91% 91% AC CURRENT (Typ.) 2A / 115VAC 1A / 230VAC 0.68A / 277VAC INRUSH CURRENT(max.) COLD START 65A(twidth=595 s measured at 50% Ipeak) at 230V AC MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <1mA / 240VAC 95 ~ 108% OVER CURRENT (Typ.) Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION 13.5 ~ 17V 18 ~ 23V 23 ~ 28V 28 ~ 34V 33 ~ 39V 42 ~ 50V 59 ~ 70V OVER VOLTAGE Protection type : Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08, UL1012, CAN/CSA-C22.2 No. 107.1-01, UL879, CSA C22.2 No.207-M89, EN61347-1, EN61347-2-13 independent SAFETY STANDARDS Note.7 (except for CLG-150 C type), UL60950-1, TUV EN60950-1,IP65 or IP67, J61347-1(except for CLG-150 C type), J61347-2-13 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (75% load) EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A MTBF 303.7K hrs min. MIL-HDBK-217F (25) 222.2*68*38.8mm (L*W*H)(CLG-150-Blank/A/B) 229*68*38.8mm (L*W*H)(CLG-150-C) OTHERS DIMENSION 1.0Kg 12pcs/13Kg/0.58CUFT(CLG-150-Blank/A/B) 1Kg 12pcs/13Kg/0.96CUFT(CLG-150-C) PACKING * ) + , - . NOTE 0 123 4 + 5 4 4 4 0 6& , ) . 6 57/ - * 18)2 79 : 87 1 7 85 7 + 4 % + + + & 9 + 81 8* <= . =& > . *9 ,,. & . : = = ) 4 + 4 4 9 81 4 + . + 81 7 < ) 8 A . 87 4 + + 4 4 + File Name:CLG-150-SPEC 2015-05-28150W Single Output Switching Power Supply CLG-150 series Mechanical Specification Case No. 954A Unit:mm Blank:(CLG-150) 222.2 12 198.2 9.6 30020 30020 AC/L(Brown) Tcase 99.1 +V(Red) AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 14AWG2C SJTW 18AWG3C 4.2 4PL T case: Max. Case Temperature. IP67 rated. Cable for I/O connection. A Type:(CLG-150- A) 222.2 12 198.2 9.6 Io ADJ. 30020 30020 AC/L(Brown) Tcase 99.1 +V(Red) AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 14AWG2C SJTW 18AWG3C Vo ADJ. 4.2 4PL T case: Max. Case Temperature. IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) File Name:CLG-150-SPEC 2015-05-28 9.4 34.2 9.4 9.4 34.2 9.4 68 68 34 34 38.8 38.8