60W Single Output LED Power Supply CLG-60 series 5 , 7 . <5 = > ) . /5 & :>A / ,4& < . < . . < . . 1/8+ % / 6/4 A ) & 4 63- & . = % % & 4 < <% % .. LPS = *: = *: IP67 SPECIFICATION MODEL CLG-60-12 CLG-60-15 CLG-60-20 CLG-60-24 CLG-60-27 CLG-60-36 CLG-60-48 DC VOLTAGE 12V 15V 20V 24V 27V 36V 48V CONSTANT CURRENT REGION Note.5 8.4 ~ 12V 10.5 ~ 15V 14 ~ 20V 16.8 ~ 24V 18.9 ~ 27V 25.2 ~ 36V 33.6 ~ 48V RATED CURRENT 5A 4A 3A 2.5A 2.3A 1.7A 1.3A CURRENT RANGE 0 ~ 5A 0 ~ 4A 0 ~ 3A 0 ~ 2.5A 0 ~ 2.3A 0 ~ 1.7A 0 ~ 1.3A RATED POWER 60W 60W 60W 60W 62.1W 61.2W 62.4W RIPPLE & NOISE (max.) Note.2 2Vp-p 2.4Vp-p 1.8Vp-p 2.7Vp-p 2.7Vp-p 3.6Vp-p 4.6Vp-p OUTPUT 11.5 ~ 13V 14.5 ~ 16.2V 19.5 ~ 22V 24 ~ 26V 25 ~ 30V 32.5 ~ 39V 43.6 ~ 51.8V VOLTAGE ADJ. RANGE Fixed can be modified between the range above CURRENT ADJ. RANGE Fixed. Can be modified between 3% ~ -25% rated output current VOLTAGE TOLERANCE Note.3 10% LINE REGULATION 3.0% LOAD REGULATION 5.0% SETUP TIME 500ms / 230VAC 3000ms / 115VAC at full load VOLTAGE RANGE Note.4 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.94/115VAC, PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer toPower Factor Characteristi curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading70% at 115VAC/230VAC input and output loading 75% at 277VAC input INPUT EFFICIENCY (Typ.) 85% 86% 87.5% 87% 88% 89% 89% AC CURRENT (Typ.) 0.8A/115VAC 0.4A/230VAC 0.3A/277VAC INRUSH CURRENT(Typ.) COLD START 35A(twidth=45s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed 13.8 ~ 16V 17.5 ~ 21V 23 ~ 28V 28 ~ 32V 31 ~ 35V 41 ~ 46V 54 ~ 60V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover PROTECTION OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down -30 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL879, UL8750, UL1310, TUV EN61347-1, EN61347-2-13 independent, CAN/CSA C22.2 No. 223-M91(except for 48V), SAFETY STANDARDS CSA C22.2 No. 250.0-08(except for 48V), CSA C22.2 No. 207-M89(except for 48V), IP67, J61347-1, J61347-2-13 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (75% load) EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547, light industry level (surge 4KV), criteria A MTBF 495.7Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 195.6*61.5*38.8mm (L*W*H) 0.86Kg 16pcs/14.8Kg/0.54CUFT PACKING NOTE % & ( % )% % & *+ , * - % . / & 0 & & / (- 1 1 2 3 -4 563 -763( 8 & % & % % & 9 4 3 % & & 9 )9 3 - . & + - 63- . : 9 & 3 / & & 63- % & % &% & & File Name:CLG-60-SPEC 2015-05-2860W Single Output LED Power Supply CLG-60 series Mechanical Specification Case No. 957A Unit:mm 195.6 11.9 171.8 9.6 30020 30020 AC/L(Brown) Tcase 85.9 +V(Red) AC/N(Blue) -V(Black) FG (Green/Yellow) SJTW 18AWG3C SVT 18AWG2C 4.24PL T case: Max. Case Temperature. Block Diagram fosc : 90KHz(115VAC) 120KHz(230VAC) RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION CIRCUIT FG O.L.P. PWM & PFC CONTROL O.C.P. O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 (HORIZONTAL) -30 -25 -5 0 15 30 50 60 70 90 100 125 135 145 155 165 175 180 200 230 295 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:CLG-60-SPEC 2015-05-28 LOAD (%) 32 46.5 61.5 30.75 LOAD (%) 38.8