70~100W Constant Current Mode LED Driver ELG -100-C series Users Manual IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL R-41027766 (for 700A,1050A only) I P 6 7 I P 6 5 A Dx File Name:ELG-100-C-SPEC 2021-09-0370~100W Constant Current Mode LED Driver ELG -100-C series SPECIFICATION MODEL ELG-100-C350 ELG-100-C500 ELG-100-C700 ELG-100-C1050 ELG-100-C1400 500mA 700mA 1050mA RATED CURRENT 350mA 1400mA 200VAC ~ 305VAC 100.1W 100W 100.1W 99.75W 100.8W RATED POWER 100VAC ~ 180VAC 70W 70W 70W 70.35W 70W CONSTANT CURRENT REGION Note.2 143 ~ 286V 100 ~ 200V 71 ~ 143V 48 ~ 95V 35 ~ 72V OUTPUT OPEN CIRCUIT VOLTAGE(max.) 297V 210V 149V 105V 75V Adjustable for A/AB-Type only (via built-in potentiometer) CURRENT ADJ. RANGE 175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA CURRENT RIPPLE 5.0% max. rated current CURRENT TOLERANCE 5.0% SET UP TIME Note.4 1000ms/115VAC 500ms/230VAC 100 ~ 305VAC 142 ~ 431VDC continue,320VAC for 24Hrs 360VAC for 1Hr VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load50%/115VC load60%/230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 92% 91% 91% 90% 90% AC CURRENT (Typ.) 1.1A / 115VAC 0.6A / 230VAC 0.5A/277VAC INRUSH CURRENT(Typ.) COLD START 40A(twidth=760s measured at 50% Ipeak)/230VAC Per NEMA 410 MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC No load power consumption <0.5W for Blank / A / Dx / D2-Type NO LOAD / STANDBY POWER CONSUMPTION Standby power consumption <0.5W for B / AB / DA-Type Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT 305 ~ 333V 222 ~ 242V 154 ~ 174V 110 ~ 130V 79 ~ 95V OVER VOLTAGE PROTECTION Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover Tcase=-40 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) WORKING TEMP. MAX. CASE TEMP. Tcase=+90 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.13-12 BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13 independent, SAFETY STANDARDS BS EN/EN62384 EAC TP TC 004 BIS IS15885(for 700A,1050A only) GB19510.1,GB19510.14 IP65 or IP67 KC61347-1,KC61347-2-13 approved Compliance to IEC62386-101,102,(207 by request) for DA Type only DALI STANDARDS SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C ( load60%) BS EN/EN61000-3-3 Gb17743, EMC EMISSION GB17625.1 EAC TP TC 020 KC KN15,KN61547 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11 BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, EMC IMMUNITY Line-Line 4KV) EAC TP TC 020 KC KN15,KN61547 MTBF 1087.5K hrs min. Telcordia SR-332 (Bellcore) 300.6Khrs min. MIL-HDBK-217F (25) DIMENSION 199*63*35.5 mm (L*W*H) OTHERS 0.85kg 16pcs/14.2kg/0.72CUFT PACKING NOTE Product Liability DisclaimerFor detailed information, please refer to