105~150W Constant Current Mode LED Driver ELG-150-C series IP65 IP67 A 0 6 ) B A *, ,B A 0 6 ) B 9 ( : 4 ( , = (, < 3456 345 > *, DE F 3/ ) G A B & A B 3 8 , *, C , , %& ( ) * + , -)./ / 0 %12 * 3456 345 ( 7 / / 8 ( , , +>) 3 , &J>K & (, 7 A 6 0 6 ) B *, 34 = + 3456 3 8 3 + A 345 3 ( 3 + : 3456 & A % / 4 9 B 3 + 3456 3 , 3 + Dx 3456 : (, 7 :, 7 ) 3456 : 3 + : 3456 & 8 , H0I 5 File Name:ELG-150-C-SPEC 2016-09-20105~150W Constant Current Mode LED Driver ELG-150-C series SPECIFICATION MODEL ELG-150-C500 ELG-150-C700 ELG-150-C1050 ELG-150-C1400 ELG-150-C1750 ELG-150-C2100 RATED CURRENT 500mA 700mA 1050mA 1400mA 1750mA 2100mA 200VAC ~ 305VAC 150.15W 149.8W 150.5W 151.2W 150W 149.8W RATED POWER 100VAC ~ 180VAC 105W 105W 105W 105W 105W 105W CONSTANT CURRENT REGION Note.2 72 ~ 143V 54 ~ 107V 43 ~ 86V 150 ~ 300V 107 ~ 214V 36 ~ 72V OPEN CIRCUIT VOLTAGE(max.) 315V 225V 151V 115V 94V 80V Adjustable for A-Type only (via built-in potentiometer) OUTPUT CURRENT ADJ. RANGE 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA 875 ~ 1750mA 1050 ~ 2100mA CURRENT RIPPLE 5.0% max. rated current CURRENT TOLERANCE 5.0% AUXILIARY DC OUTPUT Nominal 15V(deviation 11.5~15.5V) 0.4A for BE-Type only SET UP TIME Note.4 1600ms/115VAC 500ms/230VAC 100 ~ 305VAC 142 ~ 431VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF 0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load50%/115VC load 60%/230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 92% 92% 92% 91% 91% 91% AC CURRENT (Typ.) 1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC INRUSH CURRENT(Typ.) COLD START 65A(twidth=485 s measured at 50% Ipeak)/230VAC Per NEMA 410 MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC No load power consumption <0.5W for Blank / A / Dx / D2-Type NO LOAD / STANDBY POWER CONSUMPTION Standby power consumption <0.5W for B / DA-Type Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT 320 ~ 360V 230 ~ 265V 155 ~ 180V 128 ~ 150V 96 ~ 106V 82 ~ 92V OVER VOLTAGE PROTECTION Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.13-12 ENEC EN61347-1, EN61347-2-13 independent, EN62384 SAFETY STANDARDS GB19510.1, GB19510.14 IP65 or IP67 approved DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55015,EN61000-3-2 Class C ( load60%) EN61000-3-3 GB17743,GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) EMC IMMUNITY MTBF 1098.95K hrs min. Telcordia SR-332 (Bellcore) 308.5Khrs min. MIL-HDBK-217F (25) 308.5Khrs min. MIL-HDBK-217F (25) DIMENSION 219*63*35.5 mm (L*W*H) OTHERS PACKING 0.85Kg 16pcs / 14.6kg / 0.77CUFT =K* , )& / ) ( NOTE ) 4 L 3 3= 9 *EK K 9K M L *, / 5 .% . 8 , & , ( 4 D * *3 E * 3 *3 F 0 * K= K , * ( ( 7 9 ( (, / 7 7 , 9 5 * , 8 , C / * / , A *94/ B/ ( 6 6 4 , 9 = I ( > File Name:ELG-150-C-SPEC 2016-09-20