48~75W Constant Voltage + Constant Current LED Driver EL G -75 series Users Manual IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL R-41027766 (Please refer safety description) 8 I P 6 5 I P 6 7 A Dx File Name:ELG-75-SPEC 2021-09-0348~75W Constant Voltage + Constant Current LED Driver EL G -7 5 s e ri e s SPECIFICATION MODEL ELG-75-12 ELG-75-24 ELG-75-36 ELG-75-42 ELG-75-48 12V DC VOLTAGE 24V 36V 42V 48V CONSTANT CURRENT REGION Note.2 6 ~ 12V 12 ~ 24V 18 ~ 36V 21 ~ 42V 24 ~ 48V RATED CURRENT 5A 3.15A 2.1A 1.8A 1.6A 200VAC ~ 305VAC 60W 75.6W 75.6W 75.6W 76.8W RATED POWER Note.5 100VAC ~ 180VAC 60W 48W 60W 60W 60W 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.3 Adjustable for A/AB-Type only (via built-in potentiometer) VOLTAGE ADJ. RANGE 10.8 ~ 13.2V 21.6 ~ 26.4V 32.4 ~ 39.6V 43.2 ~ 52.8V 37.8 ~ 46.2V OUTPUT Adjustable for A/AB-Type only (via built-in potentiometer) CURRENT ADJ. RANGE 2.5 ~ 5A 1.57 ~ 3.15A 1.05 ~ 2.1A 0.9 ~ 1.8A 0.8 ~ 1.6A 2.5% VOLTAGE TOLERANCE Note.4 3.0% 3.0% 2.5% 2.0% 0.5% 0.5% LINE REGULATION 0.5% 0.5% 0.5% 2.0% 1.0% 1.0% 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME Note.6 500ms, 100ms/115VAC, 230VAC 10ms/ 230VAC 10ms/ 115VAC(at full load) HOLD UP TIME (Typ.) 100 ~ 305VAC 142 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load50%/115VC,230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 86% 88% 89% 90% 90% AC CURRENT 0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=350s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC No load power consumption <0.5W for Blank / A / Dx / D2-Type NO LOAD / STANDBY POWER CONSUMPTION Standby power consumption <0.5W for B / AB / DA-Type 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION 14 ~ 18V 28 ~ 34V 41 ~ 48V 47 ~ 54V 54 ~ 62V OVER VOLTAGE Shut down output voltage, re-power on to recover OVER TEMPERATURE Shut down output voltage, re-power on to recover WORKING TEMP. Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.13-12 IEC/BS EN/EN/AS/NZS 61347-1, IEC/BS EN/EN/AS/NZS 61347-2-13 independent, SAFETY STANDARDS BS EN/EN62384 EAC TP TC 004 BIS IS15885(for 12A/12DA/12B/24A/24B/24DA/36A/36B/42A/42B/48A/48B only) IP65 or IP67 GB19510.1, GB19510.14 KC61347-1,KC61347-2-13 approved DALI STANDARDS Compliance to IEC62386-101,102,(207 by request) for DA Type only WITHSTAND VOLTAGE SAFETY & I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C ( load50%) BS EN/EN61000-3-3 GB17743, GB17625.1 EMC EMISSION EAC TP TC 020 KC KN15,KN61547 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11 BS EN/EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) EAC TP TC 020 KC KN15,KN61547 MTBF 1172K hrs min. Telcordia SR-332 (Bellcore) 331Khrs min. MIL-HDBK-217F (25) 180*63*35.5mm (L*W*H) OTHERS DIMENSION PACKING 0.8Kg 16pcs/13.4Kg/0.67CUFT NOTE Product Liability Disclaimer: For detailed information, please refer to