105~150W Class Constant Current Mode LED Driver ELGT-150-C series IP65 IP67 , , 7 ( ( , 8 39 (, : % , 234) 234 9 < = ( > & > > 2> , A , , % & ( ) * % + , -./0 0 ( * 1- % 234) 234 ( % 5 0 0 6 ( , , % 9 ) * , 23 9 8 + 234) 2 6 % 2 + A 234 2 = ( ( % 2 + 8 234) & 0 3 7 2 + 234) 2 ,% 2 + . 234) 8 ( % 2 + File Name:ELGT-150-C-SPEC 2017-07-10105~150W Class Constant Current Mode LED Driver ELGT-150-C series SPECIFICATION MODEL ELGT-150-C700 ELGT-150-C1050 ELGT-150-C1400 RATED CURRENT 700mA 1050mA 1400mA 200VAC ~ 305VAC 149.8W 150.15W 149.8W RATED POWER 100VAC ~ 180VAC 105W 105W 105W CONSTANT CURRENT REGION Note.2 107 ~ 214V 72 ~ 143V 54 ~ 107V OPEN CIRCUIT VOLTAGE(max.) 115V 225V 151V Adjustable for A-Type only (via built-in potentiometer) OUTPUT CURRENT ADJ. RANGE 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA CURRENT RIPPLE 5.0% max. rated current CURRENT TOLERANCE 5.0% SET UP TIME Note.4 1600ms/115VAC 500ms/230VAC 100 ~ 305VAC 142 ~ 431VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF 0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load50%/115VC load 60%/230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 92% 92% 91% AC CURRENT (Typ.) 1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC INRUSH CURRENT(Typ.) COLD START 65A(twidth=485 s measured at 50% Ipeak)/230VAC Per NEMA 410 MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.7mA / 240VAC No load power consumption <0.5W for Blank / A / D2-Type NO LOAD / STANDBY POWER CONSUMPTION Standby power consumption <0.5W for B / DA-Type Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT 230 ~ 265V 155 ~ 180V 128 ~ 150V OVER VOLTAGE PROTECTION Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. Tcase=-40 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+90 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes ENEC EN61347-1, EN61347-2-13 independent, EN62384 GB19510.1, GB19510.14 SAFETY STANDARDS IP65 or IP67 approved DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-CASE:3.75KVAC O/P-CASE:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55015,EN61000-3-2 Class C ( load60%) EN61000-3-3 GB/T17743, GB17625.1 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) EMC IMMUNITY MTBF 1098.95K hrs min. Telcordia SR-332 (Bellcore) 308.5Khrs min. MIL-HDBK-217F (25) DIMENSION 219*63*35.5 mm (L*W*H) OTHERS PACKING 0.95Kg 16pcs / 16.0kg / 0.77CUFT % B , .& 0 . ( % NOTE .% 3 C 2 2 7 DB B9 7B E C% 9 , 0 4 / / 6 ,% &% , ( % 3 F 2 D 2 2 G % *% % B B99 , % % ( ( 5 % 7 ( (, 0 5 5 , 7 % 4% , 6 , A 0 0 , 730 0 ( ) % )% 3 , 7 H ( < % % File Name:ELGT-150-C-SPEC 2017-07-10