60W Single Output Class 2 Switching Power Supply ELN-60 series 7 , = . 67 / ,2& 6 . 6 . . . 9 ) % & 8 / . , > - - / / 7 % &B/4* . % 7C % / 5/2 2 53- & . < D ) 5 % & & % IP64 * E * LPS SPECIFICATION MODEL ELN-60-9 ELN-60-12 ELN-60-15 ELN-60-24 ELN-60-27 ELN-60-48 DC VOLTAGE 9V 12V 15V 24V 27V 48V LED OPERATION VOLTAGE Note.8 3 ~ 9V 6 ~ 12V 7.5 ~ 15V 12 ~ 24V 13.5 ~ 27V 24 ~ 48V RATED CURRENT 5A 5A 4A 2.5A 2.3A 1.3A CURRENT RANGE 0 ~ 5A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A 0 ~ 2.3A 0 ~ 1.3A RATED POWER 45W 60W 60W 60W 62.1W 62.5W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 8.7 ~ 10.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V 24.3 ~ 29.7V 43.2 ~ 52.8V OUTPUT VOLTAGE ADJ. RANGE Note.7 Can be adjusted by internal potentiometer SVR1 CURRENT ADJ. RANGE Note.7 -25% ~ 3%. Can be adjusted by internal potentiometer SVR2 VOLTAGE TOLERANCE Note.3 5.0% LINE REGULATION 1.0% LOAD REGULATION 2.0% SETUP, RISE TIME Note.6 500ms, 30ms / 230VAC 1500ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 82% 85% 86% 87% 87% 88% INPUT AC CURRENT (Typ.) 1.2A/115VAC 0.7A/230VAC INRUSH CURRENT (Typ.) COLD START 60A(twidth=600s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT 0.25mA / 240VAC 95 ~ 110% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION 11 ~ 13.5V 13.8 ~ 16V 17.5 ~ 21V 28 ~ 32V 31 ~ 37V 54 ~ 60V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover 1 ~ 10VDC or PWM signal : 100Hz ~ 3KHz FUNCTION DIMMING CONTROL (OPTIONAL) -20 ~ +60 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1310, CAN/CSA C22.2 No. 223-M91(except for 48V), IP64 approved design refer to TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 603Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 181*61.5*35mm (L*W*H) 0.4Kg 24pcs/11Kg/0.75CUFT PACKING NOTE % & ( % )% % & *+ , * - % . / & 0 & & & % & % % & 1 2 3 % & & 1 )1 3 - . & 4 5 & 6 77 & % & + . 8 & & & 2 & / 9: . 8 & & & 2 & / 9 % & & . . & & 53- < & & & 3= / & 0% & & & & File Name:ELN-60-SPEC 2015-05-2860W Single Output Class 2 Switching Power Supply ELN-60 series Mechanical Specification Case No.960A Unit:mm 181 6.26 30020 2-R2.5 +V(Red) 30020 -V(Black) AC/L(Brown) SVT 18AWG2C Tcase AC/N(Blue) 116.5 SVT 18AWG2C 6.26 T case: Max. Case Temperature. OUTPUT(with optional dimming function) +V(Red) -V(Black) Output voltage and current adjustment : remove the upper case and adjust through SVR1 & SVR2 DIM+(Blue) UL2464 18AWG4C DIM-(White) shown in the diagram. SVR1 SVR2 SVR1 Output voltage adjustment SVR2 Output current adjustment fosc : 60KHz Block Diagram RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DIM- DETECTION CIRCUIT 10V PWM O.L.P. PWM or CONTROL O.C.P. 1~10V O.V.P. DIM+ Optional Dimming Control DeratingDerating Curve Curve Static Characteristics 100 100 90 80 80 70 60 50 60 40 50 20 40 -20 -15 -5 00415 3004550 60 (HORIZONTAL) 90 100 125 135 145 155 165 175175 180 200 230 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:ELN-60-SPEC 2015-05-28 LOADLOADLOAD (%) (%) (%) 21.25 61.5 15 LOADLOAD (%) (%) 21.25 35