150W Single Output with PFC Function EPP-150 series SPECIFICATION MODEL EPP-150-12 EPP-150-15 EPP-150-24 EPP-150-27 EPP-150-48 DC VOLTAGE 12V 15V 24V 27V 48V RATED CURRENT (convection) 8.4A 6.7A 4.2A 3.71A 2.1A RATED CURRENT (20CFM FAN) 12.5A 10A 6.25A 5.56A 3.125A CURRENT RANGE (convection) 0 ~ 8.4A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 3.71A 0 ~ 2.1A CURRENT RANGE (20CFM FAN) 0 ~ 12.5A 0 ~ 10A 0 ~ 6.25A 0 ~ 5.56A 0 ~ 3.125A RATED POWER (convection) 100.8W 100.5W 100.8W 100.17W 100.8W RATED POWER (20CFM FAN) 150W 150W 150W 150.12W 150W OUTPUT RIPPLE & NOISE (max.) Note.2 130mVp-p 150mVp-p 240mVp-p 240mVp-p 300mVp-p VOLTAGE ADJ. RANGE 11.76 ~ 12.6V 14.7 ~ 15.75V 23.52 ~ 25.2V 26.46 ~ 28.35V 47.04 ~ 50.4V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% SETUP, RISE TIME 1000ms, 30ms/230VAC 2000ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC PF>0.98/115VAC at full load INPUT EFFICIENCY (Typ.) 91.5% 92% 93% 92% 92% AC CURRENT (Typ.) 1.8A/115VAC 1 A/230VAC INRUSH CURRENT (Typ.) COLD START 70A/230VAC LEAKAGE CURRENT <2mA/240VAC 105 ~ 145% rated output power OVER LOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.2 ~ 15.6V 16.83 ~ 19.5V 27.7 ~ 31.5V 30.2 ~ 34.05V 51.3 ~ 62.7V OVER VOLTAGE PROTECTION Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover AUXILIARY POWER(AUX) FUNCTION WORKING TEMP. -30 ~ +70 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC/ 500VDC / 25/ 70% RH EMC (Note 4) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, heavy industry level, criteria A MTBF 207.1Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 101.6*50.8*29mm (L*W*H) 0.2Kg 72pcs/15.4Kg/0.82CUFT PACKING NOTE File Name:EPP-150-SPEC 2016-06-1150mm 4-3.3 150W Single Output with PFC Function EPP-150 series Mechanical Specification Unit:mm 101.6 3.175 95.25 SVR1 CN105 Ground required 1 2 CN2 3 CN1 4 3 2 LED 1 FS1 T4A/250V Air flow direction FAN 20CFM 1 2 AC Input Connector (CN1) : JST B3P-VH or equivalent DC Output Connector (CN2) : JST B4P-VH or equivalent Pin No. Assignment Mating Housing Terminal Pin No. Assignment Mating Housing Terminal 1,2 DC COM 1 AC/L JST VHR JST SVH-21T-P1.1 JST VHR JST SVH-21T-P1.1 or equivalent or equivalent 2 No Pin 3,4 +V or equivalent or equivalent 3 AC/N FAN Connector(CN105) : J S T B B - P H - K - S or equivalent : Grounding required Pin No. Assignment Mating Housing Terminal 1 +12V J S T P H R - JST S P H - T- P S or equivalent or equivalent 2 DC COM Block Diagram PFC fosc : 47KHz PWM fosc : 65KHz EMI FILTER RECTIFIERS PFC POWER +V & I/P & CIRCUIT SWITCHING -V RECTIFIER FILTER RECTIFIERS +12V & FG FILTER AUX DETECTION CIRCUIT O.T.P. O.L.P. CONTROL O.V.P. Output Derating Output Derating VS Input Voltage 100 150 With 20CFM Fan 90 100 80 Convection 75 70 60 50 50 25 40 (HORIZONTAL) -30 0 10 20 30 40 50 60 70 90 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (VAC) 60Hz File Name:EPP-150-SPEC 2016-06-11 LOAD (%) 50.8 3 max. 29 44.45 3.175 LOAD (%)