120W AC-DC Single Output Desktop G S12 0 s eries Features : EUniversal AC input / Full range E3 pole AC inlet IEC320-C14 EBuilt-in active PFC function, PF>0.97 EProtections: Short circuit / Overload / Over voltage / Over temperature EFully enclosed plastic case EApprovals: UL / CUL / PSE / TUV / BSMI / CB / FCC / CE EClassI power (with earth pin) ELED indicator for power on ENo load power consumption<0.5W EErP step2 compliant ENRCan compliant EMeet EISA 2007 (Energy Independence and Security Act) E2 years warranty TUV geprUfre Rheinland Product Safety Sicherheit (except for 48V) SPECIFICATION GS120A20- GS120A24- GS120A48- ORDER NO. GS120A12-R7B GS120A15-R7B =R7B,P1M =R7B,P1M =R7B,P1M SAFETY MODEL NO. GS120A12 GS120A15 GS120A20 GS120A24 GS120A48 DC VOLTAGE 12V 15V 20V 24V 48V RATED CURRENT 8.5A 7A 6A 5A 2.5A CURRENT RANGE 0 ~ 8.5A 0 ~ 7A 0 ~ 6A 0 ~ 5A 0 ~ 2.5A RATED POWER (max.) 102W 105W 120W 120W 120W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 5.0% 5.0% 5.0% 3.0% 2.0% LINE REGULATION Note.4 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 5.0% 5.0% 4.0% 3.0% 2.0% SETUP, RISE TIME Note.6 2000ms, 30ms / 230VAC 2500ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) 20ms / 230VAC 20ms / 115VAC at full load VOLTAGE RANGE Note.7 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97 / 230VAC PF>0.99 / 115VAC at full load R7B 87.5% 89% 89% 90% 91% INPUT EFFICIENCY (Typ.) P1M ----- ----- 88.5% 89.5% 90.5% AC CURRENT 1.4A / 115VAC 0.7A / 230VAC INRUSH CURRENT (max.) 70A / 230VAC LEAKAGE CURRENT(max.) 0.75mA / 240VAC 105 ~ 160% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage PROTECTION OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover RTH2 10 0 10J OVER TEMPERATURE Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70J (Refer toDerating Curv) WORKING TEMP. 20% ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +85J, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03% /J (0~5J0 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, J60950-1(except for 48V) approved SAFETY STANDARDS WITHSTAND VOLTAGE I/P-O/P: 3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25J/ 70% RH EMC (Note. 5) EMC EMISSION Compliance to EN55022(CISPR22) ,EN61204-3 class B, CNS13438 class B, FCC PART 15, EN61000-3-2,3 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A EMC IMMUNITY MTBF 400.7K hrs min. MIL-HDBK-217F(25J) DIMENSION 167*67*35mm (L*W*H) OTHERS 0.62Kg 20pcs/13.4Kg/0.9CUFT PACKING PLUG See page 2 Other type available by customer requested CONNECTOR See page 2 Other type available by customer requested CABLE 1.All parameters are specified at 230VAC input, rated load, 25J 70% RH ambient. NOTE 2.Ripple & noise are measured at 20MHz by using a 12 twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Line regulation is measured from low line to high line at rated load. 5.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. Derating may be needed under low input voltage. Please check the derating curve for more details. File Name:GS120-SPEC 2012-08-14 :120W AC-DC Single Output Desktop G S12 0 s eries Mechanical Specification Case No.GS120A Unit:mm UL2464 18AWGx4C 1200 50mm 35 167 30 3mm 2 3 1 4 POWER LED UL2464 16AWGx2C 1200 50mm 35 167 30 3mm 11 Outside Inside POWER LED Plug Assignment Standard plug(For 20V,24V,48V only) Standard plug (all models) 11 R7B P1M PIN NO. OUTPUT P/N OUTPUT 2 3 1,4 +V CENTER + 1 4 ID 2.5 x OD 5.5 2,3 -V Outside Inside AC FG -V connected to AC FG -V connected to AC FG Derating Curve Static Characteristics 100 100 230VAC 85 80 80 60 70 100VAC 50 60 40 50 20 40 -30 10 20 30 40 45 50 60 70 (HORIZONTAL) 85 95 100 110 120 140 160 180 200 220 240 264 AMBIENT TEMPERATURE (J) INPUT VOLTAGE (VAC) 60Hz File Name:GS120-SPEC 2012-08-14 67 67 LOAD (%) LOAD (%)