100W Constant Current Mode LED Driver HBG-100 series IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL IP65 IP67 R-41027766 (for DA Type only) (for 36A,48A,60A only) , *A ) , 2 9 A B A ( (/ 300 & 9> 94: + 940 > B C , D / ,, D * , E0(((( 0 2 %& (( (() * + , -(./(01* , 2 2 31 4(1 5 - 06 2 &3(. 780 , , 94:+ 940 2 %& (( 2 ,, , , , > , < 3+/4+38+4(1 < 2 = , 9 > A 5 94: = 5 A 940 C & , = 5 94: / ,, . (1 (1 9) = 5 * 940 C & , 2 / ,, = 5 * 94: * = 5 File Name:HBG-100-SPEC 2018-09-30100W Constant Current Mode LED Driver HBG-100 series SPECIFICATION MODEL HBG-100-24 HBG-100-36 HBG-100-48 HBG-100-60 RATED CURRENT 1.6A 4A 2.7A 2A RATED POWER 96W 97.2W 96W 96W CONSTANT CURRENT REGION Note.2 14.4 ~ 24V 21.6 ~ 36V 28.8 ~ 48V 36 ~ 60V OPEN CIRCUIT VOLTAGE(max.) 25V 37V 49V 62V OUTPUT Adjustable for A/AB-Type (via built-in potentiometer) CURRENT ADJ. RANGE 2.4 ~ 4A 1.62 ~ 2.7A 1.2 ~ 2A 1.0 ~ 1.6A 5.0% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 5.0% 2000ms / 115VAC 500ms / 230VAC SETUP TIME Note.4 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC,230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION INPUT (Please refer to TOTAL HARMONIC DISTORTION(THD) section) EFFICIENCY (Typ.) Note.5 90.5% 91% 91% 91.5% AC CURRENT (Typ.) 1.1A / 115VAC 0.5A / 230VAC 0.45A / 277VAC INRUSH CURRENT (Typ.) COLD START 60A(twidth=550 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Constant current limiting 28 ~ 35V 41 ~ 49V 54 ~ 63V 65 ~ 75V PROTECTION OVER VOLTAGE Shut down o/p voltage re-power on to recovery OVER TEMPERATURE Shut down o/p voltage re-power on to recovery WORKING TEMP. Tcase=-40 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+85 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL),CSA C22.2 No.250.13-12, ENEC EN61347-1,EN61347-2-13 independent, EN62384 GB19510.1,GB19510.14, SAFETY STANDARDS BIS IS15885(for 36A,48A,60A only), EAC TP TC 004,IP65 or IP67 approved DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Note.7 Compliance to EN55015, EN61000-3-2 Class C() load60% EN61000-3-3, GB17743 and GB17625.1, EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547,light industry level (surge immunity:Line-Earth:4KV,Line-Line:2KV), EAC TP TC 020 MTBF 985.6K hrs min. Telcordia SR-332 (Bellcore) 300Khrs min. MIL-HDBK-217F (25) 130mm *66.5mm (D * H) OTHERS DIMENSION 1.18Kg 12pcs/15.7Kg/1.43CUFT(Blank/A/B Type),1.89CUFT(E Type) PACKING * , AF , , /(1* 0 , , NOTE 9 G < 1 A% F = F> F H G / & , 2 9 = * *<* < = 3 , , FA+F>> , , 0 * 2 6 4 , 2 , 2 , = , 2 , , , , & , : , 9 2 2 , , 8 , E0( ((( 2 9 :0 - 9 2 , *A ) I 2 B++222 , 2 , ( , , / 0+ (((, 2 , 0 + (((, 2 , (((, 40(( > 9 2 , B++222 , 2 ,+H +9 >+ J A File Name:HBG-100-SPEC 2018-09-30