100W Single Output Switching Power Supply HEP-100 series / 1 IP65 IP68 5 - . / ( *0 1 < 2 . < () . **3+, 4 5* 4 56 7 580 9 : < < < < * /= 1 5 % % & & ( & ** +, : 4 5 0 I > . 2 & : < 4 56 0 4 < < File Name:HEP-100-SPEC 2016-02-18100W Single Output Switching Power Supply HEP-100 series SPECIFICATION MODEL HEP-100-12 HEP-100-15 HEP-100-24 HEP-100-36 HEP-100-48 HEP-100-54 DC VOLTAGE 12V 15V 24V 36V 48V 54V RATED CURRENT 8.34A 6.67A 4A 2.65A 2A 1.77A RATED POWER 100.08W 100.05W 96W 95.4W 96W 95.58W RIPPLE & NOISE (max.) Note.2 120mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V 13.5 ~ 17V 22 ~ 27V 33 ~ 40V 43 ~ 53V 49 ~ 58V Can be adjusted by internal potentiometer for A type only OUTPUT CURRENT ADJ. RANGE 5 ~ 8.34A 4 ~ 6.67A 2.5 ~ 4A 1.65 ~ 2.65A 1.25 ~ 2A 1.1 ~ 1.77A VOLTAGE TOLERANCE Note.3 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.7 1200ms,50ms/115VAC 500ms,50ms/230VAC at full load HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.4 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load INPUT EFFICIENCY (Typ.) 92% 92% 93% 93% 93% 93% AC CURRENT (Typ.) 1.2A / 115VAC 0.55A / 230VAC 0.5A / 277VAC INRUSH CURRENT(Typ.) COLD START 60A at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC 105 ~ 125% OVERLOAD Protection type : Constant current limiting, recovers automatically after fault condition is removed Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 14 ~ 17V 18 ~ 21V 28 ~ 34V 41 ~ 46V 54 ~ 63V 59 ~ 65V OVER VOLTAGE Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE -55 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -60 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.6 UL60950-1, IP65 (or IP68 for HEP-100 Blank type) approved design refer to TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level (surge 6KV), criteria A MTBF 164.7K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 220*68*38.8mm (L*W*H) 1.12Kg 12pcs/14.4Kg/0.8CUFT PACKING =<% A( 0 A* NOTE A B C A 7 D AE C F, ( % : F & * 5 7 =5 * 6 = *A( 92, . 6 , G % <= <.. 6 % 7 7 % ( * A /5* 1 % 4 56 File Name:HEP-100-SPEC 2016-02-18