600W Single Output Switching Power Supply HEP-600 series Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com ID 2000000000 5 . / 0 1 23 4 > 5 / 6 7 &2 // ) * / % + 8 ,- 9 : < = 2 06 &-4 % % % & & ( % ( ) *% ( + ,- & File Name:HEP-600-SPEC 2015-09-18600W Single Output Switching Power Supply HEP-600 series SPECIFICATION MODEL HEP-600-12 HEP-600-15 HEP-600-20 HEP-600-24 HEP-600-30 HEP-600-36 HEP-600-42 HEP-600-48 HEP-600-54 36V 42V DC VOLTAGE 12V 15V 20V 24V 30V 48V 54V RATED CURRENT 40A 36A 28A 25A 20A 16.7A 14.3A 12.5A 11.2A RATED POWER 480W 540W 560W 600W 600W 601.2W 600.6W 600W 604.8W 250mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 350mVp-p VOLTAGE ADJ. RANGE 10.2 ~ 12.6V 12.7 ~ 15.8V 17 ~ 21V 20.4 ~ 25.2V 25.5 ~ 31.5V 30.6 ~ 37.8V 35.7 ~ 44.1V 40.8 ~ 50.4V 45.9 ~ 56.7V Can be adjusted by internal potentiometer OUTPUT CURRENT ADJ. RANGE 8.3 ~ 16.7A 7.1 ~ 14.3A 20 ~ 40A 18 ~ 36A 14 ~ 28A 12.5 ~ 25A 10 ~ 20A 6.2 ~ 12.5A 5.6 ~ 11.2A VOLTAGE TOLERANCE Note.3 3.0% 2.0% 1.5% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.5 500ms, 80ms at full load 230VAC /115VAC HOLD UP TIME (Typ.) 15ms at full load 230VAC /115VAC VOLTAGE RANGE Note.4 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load INPUT EFFICIENCY (Typ.) 93% 95% 95.5% 96% 96% 96% 94% 95% 95.5% AC CURRENT (Typ.) 7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=1000 s measured at 50% I peak) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC 105 ~ 125% OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed PROTECTION 13 ~ 16V 16.5 ~ 20.5V 22 ~ 26V 26 ~ 30V 32.5 ~ 36.5V 39.5 ~ 43.5V 46 ~ 50V 52.5 ~ 56.5V 59 ~ 63V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Power on :H >2 ~ 5V or Open circuit Power off : Lo <0 ~ 0.5V or Short circuit REMOTE ON/OFF CONTROL FUNCTION 5V STANDBY 5VSB : 5V 0.5A tolerance5%, ripple : 100mVp-p(max.) -40 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1, TUV EN60950-1 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH (Note.6) EMC EMISSION Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A MTBF 76.9K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 280*144*48.5mm (L*W*H) 3.9Kg 4pcs/16.6Kg/0.9CUFT PACKING 9& 6 1 3 % 2 & NOTE & A B C 9 D &9 A +- & 1& < % & +& & ( & 2& = & 6 // & & > & B E 1 F1 9 ( & > B & / B % G BH &I 0 < & & 4 -& 1&2 9 0 2 4& File Name:HEP-600-SPEC 2015-09-18