120W Constant Voltage + Constant Current LED Driver HLG-120H series Bauart gepruft Sicherheit egelma ge od os be wac g www.tuv.com IP65 IP67 ID 2000000000 ) . ) ) +* - Metal housing with class I design +* - -&5 8 - / & 0 ) , 0 : - 10 2 10 , +* , - 3 4 5 6 +* - - 6 7 78 < , ) = * 78 , 9 - - > ) , 2 8 8 %& () *) +* , - current output. HLG-120H operates from 90305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 93.5%, with the fanless design, the entire series is able to operate for -40~ +80 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-120H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. 78 10 A / : 10 2 I , B 1 : ( 10 I 4 5 - - 5 & 1 : B 10 2 , C *)= 0 1 : D 10 2 7 , = +(A + , , 8 /8 D File Name:HLG-120H-SPEC 2016-05-10120W Constant Voltage + Constant Current LED Driver HLG-120H series SPECIFICATION MODEL HLG-120H-12 HLG-120H-15 HLG-120H-20 HLG-120H-24 HLG-120H-30 HLG-120H-36 HLG-120H-42 HLG-120H-48 HLG-120H-54 36V 42V DC VOLTAGE 12V 15V 20V 24V 30V 48V 54V CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V RATED CURRENT 10A 8A 6A 5A 4A 3.4A 2.9A 2.5A 2.3A 122.4W 121.8W RATED POWER 120W 120W 120W 120W 120W 120W 124.2W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p Adjustable for A-Type only (via built-in potentiometer) VOLTAGE ADJ. RANGE 33 ~ 40V 38 ~ 46V 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 43 ~ 53V 49 ~ 58V OUTPUT Adjustable for A-Type only (via built-in potentiometer) CURRENT ADJ. RANGE 5 ~ 10A 4 ~ 8A 3 ~ 6A 2.5 ~ 5A 2 ~ 4A 1.7 ~ 3.4A 1.4 ~ 2.9A 1.2 ~ 2.5A 1.1 ~ 2.3A 1.0% 1.0% VOLTAGE TOLERANCE Note.3 2.5% 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.6 1200ms,50ms/115VAC 500ms,50ms/230VAC HOLD UP TIME (Typ.) 12ms / 115VAC, 230VAC 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.98/115VAC, PF 0.95/230VAC, PF0.93/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20% ( load50% / 115VAC,230VAC load 75% / 277VAC) TOTAL HARMONIC DISTORTION (Please refer t TOTAL HARMONIC DISTORTION (THD) section) INPUT EFFICIENCY (Typ.) 92% 92% 93% 93% 93% 93% 93.5% 93.5% 93% AC CURRENT (Typ.) 1.4A / 115VAC 0.6A / 230VAC 0.55A / 277VAC INRUSH CURRENT (Typ.) COLD START 60A(twidth=375 s measured at 50% I peak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 47 ~ 53V 59 ~ 65V PROTECTION 14 ~ 17V 18 ~ 21V 23 ~ 27V 28 ~ 34V 34 ~ 38V 41 ~ 46V 54 ~ 63V OVER VOLTAGE Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE Tcase= -40 ~ +80 (Please refer toOUTPUT LOAD vs TEMPERATUR section) WORKING TEMP. MAX. CASE TEMP. Tcase= +80 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/(0 ~ 60 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No. 250.0-08, ENEC, TUV EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, SAFETY STANDARDS Note.8 J61347-2-13 approved design refer to UL60950-1, TUV EN60950-1 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Note.8 Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( load50%) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) EMC IMMUNITY MTBF 192.2K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 220*68*38.8mm (L*W*H) 1.12Kg 12pcs/14.4Kg/0.8CUFT PACKING ( AE7 8 () = , 5 NOTE F > , 5 - 58 G & - , F 2 , 7 3 = 0 , G* 1 1A% +7 E* E +* E*H +G * & 8 5 0 , 7(71) ) ( ()7+ 1 71)< , - , , 7 EA E - 8 , - 2 7- - 5 5 - , D + ) , 5 ,, 58 - = - , D , &D ,8 + ) * - 7- , , ))) %/ I = %/ I = %/ 22 %/ 2 0 +(A + , I 7 , , D , - + 0 , - , B = - +* 8 5 5 - - - 8 - 7- - 8 , B 8 , 9 = - , - 7 = 8 7 0= * ) = 5 2 0 , - 8 +(A + J 5 - 3 File Name:HLG-120H-SPEC 2016-05-10