150W Constant Current Mode LED Driver HLG-120H-C series IP65 IP67 % & ( ) * * + ,--- 3 6 ),-3 ) -7 1 8 3 6 ),-3 9-~(- 41 ( - 1 )0-- 18 * : 90 < < 0-= >9- 8 * 8 3 6 ),-3 < < 8 . /( - ---- )- - )0-- 12 3 (- 41 . 5 * A A & 8 5 : ( ) /)=)-4 < )-4 7 2 5 : * < 1A 7 / 28 File Name:HLG-120H-C-SPEC 2016-06-13150W Constant Current Mode LED Driver HLG-120H-C series SPECIFICATION MODEL HLG-120H-C350 HLG-120H-C500 HLG-120H-C700 HLG-120H-C1050 HLG-120H-C1400 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA RATED POWER 150.5W 150W 150.5W 155.4W 151.2W CONSTANT CURRENT REGION Note.2 215 ~ 430V 150V ~ 300V 107V ~ 215V 74V ~ 148V 54V ~ 108V Adjustable for A-Type only (via built-in potentiometer) OUTPUT CURRENT ADJ. RANGE 175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA CURRENT RIPPLE 8.0% max. rated current CURRENT TOLERANCE 5% SET UP TIME Note.4 1000ms / 115VAC 500ms / 230VAC 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.98/115VAC, PF 0.96/230VAC, PF0.93/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20% ( load50% /115VAC, 230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION (THD) section) INPUT EFFICIENCY (Typ.) 94% 94% 94% 94% 93.5% AC CURRENT (Typ.) 1.6A / 115VAC 0.8 A / 230VAC 0.7A / 277VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=600 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT 475 ~ 495V 335 ~ 355V 240 ~ 260V 165 ~ 175V 120 ~ 130V PROTECTION OVER VOLTAGE Shut down o/p voltage with auto-recovery or re-power on to recovery Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE Tcase=-40 ~ +90(Please refer toOUTPUT LOAD vs TEMPERATUR section) WORKING TEMP. MAX. CASE TEMP. Tcase=+90 10 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.6 UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent, IP65 or IP67, J61347-1, J61347-2-13 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC SAFETY & I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH ISOLATION RESISTANCE EMC EMC EMISSION Note.6 Compliance to EN55015, EN61000-3-2 Class C ( load50%) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) EMC IMMUNITY MTBF 652.2K hrs min. Telcordia SR-332 (Bellcore) 191.1K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 220*68*38.8mm (L*W*H) PACKING 1.04Kg 12pcs/13.5Kg/0.8CUFT )8 1 AB* ,(-41 < , 8 NOTE ,8 C . 4 A6 *3B 5 B B D C8 (8 8 E5*1* 31.1 * . 5* F 8 08 8 * BA B 8 8 * 8 5 < 8 8 * /6 )9 )-8)0< 6 )9 )-8)< 6 0( 6 , 8)2 8 1A 7 88 * < 8 G8 * + ,<--- * < / * < 2< G- 8 98 1A 7 H % 8 8 File Name:HLG-120H-C-SPEC 2016-06-13