600W Constant Voltage + Constant Current LED Driver HLG-600H series IP65 IP67 + 8 Metal housing with class I design Standby power consumption <0.5W at remote off 9 1: , 9 1- ( < = 0 * % & % & > 1 ... : 3 5 1.. 1..6 7 , current output. HLG-600H operates from 90305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 96%, with the fanless design, the entire series is able to operate for -40~ +90 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-600H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. ( ) %+,*-+.+/+,0.+,01+,+,/2+,-/+& ) 3 4 9 ( A 7 9 1- I + < 9 4 B 9 1: 0 * %.C*.+ *.+ 6D & 9 4 9 1: I + B File Name:HLG-600H-SPEC 2016-04-29600W Constant Voltage + Constant Current LED Driver HLG-600H series SPECIFICATION MODEL HLG-600H-12 HLG-600H-15 HLG-600H-20 HLG-600H-24 HLG-600H-30 HLG-600H-36 HLG-600H-42 HLG-600H-48 HLG-600H-54 36V 42V DC VOLTAGE 12V 15V 20V 24V 30V 48V 54V CONSTANT CURRENT REGION Note.4 6 ~12V 7.5 ~ 15V 10 ~ 20V 12 ~ 24V 15 ~ 30V 18 ~ 36V 21 ~ 42V 24 ~ 48V 27 ~ 54V RATED CURRENT 40A 36A 28A 25A 20A 16.7A 14.3A 12.5A 11.2A 601.2W 600.6W RATED POWER 480W 540W 560W 600W 600W 600W 604.8W RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p Adjustable for A-Type only (via built-in potentiometer) VOLTAGE ADJ. RANGE 30.6 ~ 37.8V 35.7 ~ 44.1V 10.2 ~ 12.6V 12.7 ~ 15.8V 17 ~ 21V 20.4 ~ 25.2V 25.5 ~ 31.5V 40.8 ~ 50.4V 45.9 ~ 56.7V OUTPUT Adjustable for A-Type only (via built-in potentiometer) CURRENT ADJ. RANGE 20 ~ 40A 18 ~ 36A 14 ~ 28A 12.5 ~ 25A 10 ~ 20A 8.3 ~ 16.7A 7.1 ~ 14.3A 6.2 ~ 12.5A 5.6 ~ 11.2A 1.0% 1.0% VOLTAGE TOLERANCE Note.3 3.0% 2.0% 1.5% 1.0% 1.0% 1.0% 1.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.6 500ms, 80ms/ 115VAC, 230VAC HOLD UP TIME (Typ.) 15ms / 115VAC, 230VAC 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.98/115VAC, PF 0.95/230VAC, PF0.93/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20% ( load50% /115VAC, 230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION (THD) section) 230VAC 92% 93.5% 94.5% 95% 95.5% 96% 96% 96% 95% EFFICIENCY INPUT (Typ.) 277VAC 92.5% 93.5% 94.5% 95% 95% 95.5% 96% 96% 96% AC CURRENT (Typ.) 7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC INRUSH CURRENT(Typ.) COLD START 70A(twidth=1000 s measured at 50% I peak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC STANDBY POWER CONSUMPTION <0.5W at remote off 95 ~ 108% OVER CURRENT Note.4 Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed PROTECTION 13 ~ 16V 16.5 ~ 20.5V 22 ~ 26V 26 ~ 30V 32.5 ~ 36.5V 39.5 ~ 43.5V 46 ~ 50V 52.5 ~ 56.5V 59 ~ 63V OVER VOLTAGE Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Power on :Hig >2 ~ 5V or Open circuit Power off : Lo <0 ~ 0.5V or Short circuit REMOTE ON/OFF CONTROL FUNCTION 5VSB : 5V 0.5A tolerance5%, ripple : 100mVp-p(max.) 5V STANDBY Tcase= -40 ~ +90 (Please refer toOUTPUT LOAD vs TEMPERATUR section) WORKING TEMP. Tcase= +90 MAX. CASE TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 55) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL60950-1, UL8750(typeHL), CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP65 or IP67, SAFETY STANDARDS Note.8 J61347-1, J61347-2-13 approved SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH (Note 9) EMC EMISSION Note.8 Compliance to EN55015, EN55022(CISPR22) Class B, EN61000-3-2 Class C ( load50%) EN61000-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV) EMC IMMUNITY MTBF 76.9K hrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 280*144*48.5mm (L*W*H) 3.9Kg 4pcs/16.6Kg/0.9CUFT PACKING * 7 AE 0.+7 - NOTE ) F .D 3 G 3 3 3 . * F /: 0 / G )9+9A5 D E 4 E( DE H G - 3 4 7 9 7)7 )94 9 1 EA,E(( : 3 3 B 7 D 01. I01. 3 * B D ( 3 D D9 3 % ,,333 3 & 2 %5 *J-*. */ 5 *J-*. * 5 *::/0 5 *:1 - *& D 7A 6 J >1 ... 3 % D & :- *. 3 D 7A 6 K 3 ,,333 3 File Name:HLG-600H-SPEC 2016-04-29