65W Constant Current Mode LED Driver IDLC-65 series S&E 01 1 6 01 7 ( 8 9 87 : ) & 9 ( 01 3 /1 ) & 01 7 <, = 6 1 = >1 1 % % & ( ) % * +,- . / )0 1 *-23 3 / , +4* ) % 5 3 3 6 / 1 1 ) 7 < 6 1 ,. <: 01 7 : , + . .8& 9 ( ( 1 ( : <0 01 1 % : 6 1 ) File Name:IDLC-65-SPEC 2018-01-1065W Constant Current Mode LED Driver IDLC-65 series SPECIFICATION MODEL IDLC-65 -700 IDLC-65 -1050 IDLC-65 -1400 IDLC-65 -1750 700mA 1050mA 1400mA 1750mA RATED CURRENT RATED POWER 65.1W 65.1W 64.4W 63W CONSTANT CURRENT REGION Note.2 69 ~ 93V 46 ~ 62V 34 ~ 46V 27 ~ 36V OPEN CIRCUIT VOLTAGE(max.) 118V 82V 60V 53V OUTPUT 5% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 7.0% SETUP TIME Note.4 500ms / 230VAC AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6) 50mA for IDLC-65A only 180 ~ 295VAC 254 ~ 417VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.95/230VAC, PF>0.9/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20% load75%/230VAC,277VAC TOTAL HARMONIC DISTORTION INPUT (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 89% 87% 86% 86% AC CURRENT 0.4A/230VAC 0.3A/277VAC INRUSH CURRENT (Typ.) COLD START 30A(twidth=100 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD / STANDBY No load power consumption <0.5W for Blank-Type, <1.2W for IDLC-65A POWER CONSUMPTION Standby power consumption <0.5W for DA-Type Hiccup mode,auto-recovery after fault condition is removed for DA type PROTECTION SHORT CIRCUIT Hiccup mode,re-power on to recovery for other type Tcase=-20 ~ +85 (Please refer to OUTPUT LOAD vs TEMPERATURE section) WORKING TEMP. MAX. CASE TEMP. Tcase=+85 WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 40) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750 CSA C22.2 NO.250.13-12 ENEC EN61347-1 & EN61347-2-13 independent, SAFETY STANDARDS AS/NZS 61347-1 & AS/NZS 61347-2-13 independent(except for DA-type), EN62384, EAC TP TC 004,GB19510.1,GB19510.14 approved DALI STANDARDS Note.7 Compliance to IEC62386-101,102 for DA-Type only SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH ISOLATION RESISTANCE EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (75% load) EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Line:1KV),EAC TP TC 020 EMC IMMUNITY MTBF 380.7Khrs min. MIL-HDBK-217F (25) 130*75*25mm(L*W*H) OTHERS DIMENSION PACKING 0.23Kg 54pcs/ 13.5Kg/ 0.96CUFT ) :A0 1 ,> . 3 , / ) NOTE ,)8 B . :C 0DA A7 A E B) >) 1/ )8 F 0 0 D 0 0 ) ) )0 A: A77 1 ) ) 6) ,. / = / / ) %)0 / / 5 ) / /1 3 5 5 1 ) )0 / < H 1 ) *)0 / >) , % ) File Name:IDLC-65-SPEC 2018-01-10