25W PWM Output LED Driver IDLV-25 series IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL S&E R-41027766 / (3.( 3 3= =< 1 %& ( ) * +,-. / 0( 1 ) 2 3 / ( ( 14 5 6 7 (3. 3. 5 8 - (3. 9,39. 5 : 3 , - 0 <=> : (3, A9, - (3. 6 : - / 383=87 8=<8 , 1 ) ) * 0 3 /, , , 1 0 A 3 5 6 0 File Name:IDLV-25-SPEC 2018-03-1525W PWM Output LED Driver IDLV-25 series SPECIFICATION MODEL IDLV-25 -12 IDLV-25 -24 IDLV-25 -36 IDLV-25 -48 IDLV-25 -60 36V DC VOLTAGE 12V 24V 48V 60V CONSTANT CURRENT REGION 1.8A 1.05A 0.7A 0.52A 0.42A 21.6W 25.2W 25.2W 24.96W 25.2W RATED POWER 0~100% DIMMING RANGE OUTPUT VOLTAGE TOLERANCE 10.0% PWM FREQUENCY (Typ.) 1KHz (20%) SETUP TIME Note.3 500ms / 230VAC 1200ms/115VAC AUXILIARY DC OUTPUT Note.4 Nominal 12V(deviation 11.4~12.6) 50mA for A-Type only 90 ~ 295VAC 127 ~ 417VDC VOLTAGE RANGE Note.2 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load70%/115VAC,230VAC load 75%/277VAC) INPUT TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 80% 81% 82% 83% 84% AC CURRENT (Typ.) 0.4A / 115VAC 0.16A / 230VAC 0.13A / 277VAC INRUSH CURRENT(Typ.) COLD START 30A(twidth=150 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC <0.5W for Blank-Type, <1.2W for A-Type NO LOAD POWER CONSUMPTION Shut down output voltage, re-power on to recover SHORT CIRCUIT 105 ~ 120% PROTECTION OVER CURRENT Protection type : Constant current limiting, recovers automatically after fault condition is removed WORKING TEMP. Tcase=-20 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+90 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 45) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750,CSA C22.2 NO.250.13-12 EN/AS/NZS 61347-1 & EN/AS/NZS 61347-2-13 independent, EN62384, SAFETY STANDARDS GB19510.1,GB19510.14,BIS IS15885(for IDLV-25-12,24,48 only), EAC TP TC 004 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C ( load70%) EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020 Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Line:1KV),EAC TP TC 020 EMC IMMUNITY MTBF 382.7Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 110*75*22mm (L*W*H) 0.2Kg 63pcs/13.6Kg/ 0.88CUFT PACKING -5 *B 37, 5 3. : - NOTE 3- ( : - C 5 %5 5 D - 7- - B*8B)) - =- 5 6- 3 : 4 : : - .- : : - : : - - : 7-.8 ,,, . 8 ,,, 3,,, / .,, 1- File Name:IDLV-25-SPEC 2018-03-15