45W Constant Current Mode LED Driver IDPC-45 serie s File Name:IDPC-45-SPEC 2020-09-2745W Constant Current Mode LED Driver IDPC-45 serie s SPECIFICATION MODEL IDPC-45 -350 IDPC-45 -500 IDPC-45 -700 IDPC-45 -1050 IDPC-45 -1400 RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA RATED POWER 33.25W 45W 44.8W 45.15W 44.8W 57 ~ 95V 54 ~ 90V 26 ~ 43V CONSTANT CURRENT REGION Note.2 38 ~ 64V 19 ~ 32V 115V 84V 63V 50V OPEN CIRCUIT VOLTAGE(max.) 118V OUTPUT 5% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 7.0% SETUP TIME Note.4 500ms / 230VAC 1200ms/115VAC AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6) 50mA for IDPC-45A only 90 ~ 295VAC 127 ~ 417VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.95/115VAC, PF>0.92/230VAC, PF>0.9/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VAC,230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION INPUT (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 86% 85% 85% 84% 83% AC CURRENT 0.6A/115VAC 0.4A/230VAC 0.3A/277VAC INRUSH CURRENT (Typ.) COLD START 30A(twidth=100s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC No load power consumption<0.5W for Blank-Type,<1.2W for IDPC-45A NO LOAD/STANDBY POWER CONSUMPTION Standby power consumption<0.5W for DA-Type Hiccup mode,auto-recovery after fault condition is removed for DA type PROTECTION SHORT CIRCUIT Hiccup mode,re-power on to recovery for other type WORKING TEMP. Ta=-20 ~ +40 (Please refer to OUTPUT LOAD vs TEMPERATURE section) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 40 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS Ul8750, CSA C22.2 NO.250.13-12 ENEC EN61347-1, EN61347-2-13, EN62384,GB19510.1,GB19510.14, EAC TP TC 004 approved DALI STANDARDS Compliance to IEC62386-101, 102 for DA-Type only WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH ISOLATION RESISTANCE EMC Compliance to EN55015, EN61000-3-2 Class C ( load60%) EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Line:1KV),EAC TP TC 020 EMC IMMUNITY MTBF 408.8Khrs min. MIL-HDBK-217F (25) 120*66.5*25mm(L*W*H) OTHERS DIMENSION 0.14Kg 81pcs/ 12.5Kg/ 1.32CUFT PACKING NOTE ,