65W Constant Current Mode LED Driver IDPC-65 serie s File Name:IDPC-65-SPEC 2020-09-2765W Constant Current Mode LED Driver IDPC-65 serie s SPECIFICATION MODEL IDPC-65 -700 IDPC-65 -1050 IDPC-65 -1400 IDPC-65 -1750 RATED CURRENT 700mA 1050mA 1400mA 1750mA RATED POWER 65.1W 65.1W 64.4W 63W CONSTANT CURRENT REGION Note.2 69 ~ 93V 46 ~ 62V 34 ~ 46V 27 ~ 36V OPEN CIRCUIT VOLTAGE(max.) 118V 82V 60V 53V OUTPUT 5% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 7.0% SETUP TIME Note.4 500ms / 230VAC AUXILIARY DC OUTPUT Note.5 Nominal 12V(deviation 11.4~12.6) 50mA for IDPC-65A only 180 ~ 295VAC 254 ~ 417VDC VOLTAGE RANGE Note.3 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF>0.95/230VAC, PF>0.9/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20% load75%/230VAC, 277VAC TOTAL HARMONIC DISTORTION INPUT (Please refer to TOTAL HARMONIC DISTORTION section) EFFICIENCY (Typ.) 86% 89% 87% 86% 0.4A/230VAC 0.3A/277VAC AC CURRENT INRUSH CURRENT (Typ.) COLD START 30A(twidth=100s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD / STANDBY No load power consumption <0.5W for Blank-Type, <1.2W for IDPC-65A Standby power consumption <0.5W for DA-Type POWER CONSUMPTION Hiccup mode,auto-recovery after fault condition is removed for DA type PROTECTION SHORT CIRCUIT Hiccup mode,re-power on to recovery for other type WORKING TEMP. Ta= -20 ~ +40 (ambient temperature) 20 ~ 90% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 40 ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750, CSA C22.2 NO.250.13-12 ENEC EN61347-1, EN61347-2-13, EN62384, SAFETY STANDARDS GB19510.1,GB19510.14, EAC TP TC 004 approved DALI STANDARDS Note.7 Compliance to IEC62386-101,102 for DA-Type only SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (75% load) EN61000-3-3,GB17743,GB17625.1,EAC TP TC 020 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level(surge immunity:Line-Line:1KV),EAC TP TC 020 380.7Khrs min. MIL-HDBK-217F (25 ) MTBF DIMENSION OTHERS 130*67.5*20.5mm(L*W*H) PACKING 0.15Kg 81pcs/ 13Kg/ 1.46CUFT NOTE ,