60W Multiple-Stage Constant Current Mode LED Driver LCM-60DA series 8 9 8: ), : < = >2 2 6 * & %& % () * %+,- , *. )/ 0 +%12 2 & 34+ ) 2 5 6 7 ) : 9 / : 9 0 2 ), 0 AUX 2 *)% 7 9 5 File Name:LCM-60DA-SPEC 2016-08-0460W Multiple-Stage Constant Current Mode LED Driver LCM-60DA series SPECIFICATION MODEL LCM-60DA- Current level selectable via DIP switch, please refer toDIP SWITCH TABLE section CURRENT LEVEL 500mA 600mA 700mA(default) 900mA 1050mA 1400mA RATED POWER 60.3W DC VOLTAGE RANGE 2 ~ 90V 2 ~ 90V 2 ~ 86V 2 ~ 67V 2 ~ 57V 2 ~ 42V OUTPUT OPEN CIRCUIT VOLTAGE (max.) 95V 73V CURRENT RIPPLE Note.5 5.0% max. rated current CURRENT TOLERANCE 5% AUXILIARY DC OUTPUT Nominal 12V(deviation 11.4~12.6V) 50mA for AUX-Type only SETUP TIME Note.3 500ms / 230VAC 180 ~ 295VAC 254 ~ 417VDC VOLTAGE RANGE Note.2 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.975/230VAC, PF 0.96/277VAC full load POWER FACTOR (Typ.) (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load75%) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) EFFICIENCY (Typ.) Note.4 92% INPUT AC CURRENT (Typ.) 0.32A/230VAC 0.27A/277VAC INRUSH CURRENT (Typ.) COLD START 20A(twidth=270s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 25 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.5mA / 240VAC STANDBY POWER <0.5W for Blank-Type, <1.2W for AUX-Type CONSUMPTION Note.6 SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed 105 ~ 125V OVER VOLTAGE PROTECTION Shutdown o/p voltage, re-power on to recover OVER TEMPERATURE Shutdown o/p voltage,re-power on to recover DIMMING Please refer toDIMMING OPERATIO section Please refer toSYNCHRONIZATION OPERATION section FUNCTION SYNCHRONIZATION By external NTC, please refer to TEMPERATURE COMPENSATION OPERATIONsection TEMP. COMPENSATION WORKING TEMP. Tcase=-30 ~ +90 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+90 WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH 0.03%/(0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS UL8750, CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent,GB19510.14,GB19510.1 approved DALI STANDARDS Comply with IEC62386-101, 102, 207 SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC EMC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH EMC EMISSION Note.7 Compliance to EN55015, EN61000-3-2 Class C( load40%) EN61000-3-3 GB17625.1,GB17743 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level()surge immunity Line-Line 2KV MTBF 193.6K hrs min. MIL-HDBK-217F (25) 123.5*81.5*23mm (L*W*H) OTHERS DIMENSION PACKING 0.24Kg 54pcs/15Kg/1.12CUFT *) / %& - 2 %, ) NOTE %) ) 8 / / A B / B / C ) &) ) / :: ) .) + (- 8 ) ,) 13* 1 7 ) ) * ~%& - ) () / 5 ) 2 5 5 ) File Name:LCM-60DA-SPEC 2016-08-04