LPF-16-12P Mean Well

16W Single Output Switching Power Supply LPF-16 series 8 , < / 78 = > 4 ,9& 7 / 7 / / 7 / ) / 48 / 8 % & 4 / = :> % 8A % 46+= ,048) 6) 4> 9 012 & / % % & 9 7 =% 048) 6) 4> % IP30 SPECIFICATION MODEL LPF-16-12 LPF-16-15 LPF-16-20 LPF-16-24 LPF-16-30 LPF-16-36 LPF-16-42 LPF-16-48 LPF-16-54 DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V 19.8 ~ 36V 23.1 ~ 42V CONSTANT CURRENT REGION Note.4 6.6 ~12V 8.25 ~ 15V 11 ~ 20V 13.2 ~ 24V 16.5 ~ 30V 26.4 ~ 48V 29.7 ~ 54V RATED CURRENT 1.34A 1.07A 0.8A 0.67A 0.54A 0.45A 0.39A 0.34A 0.3A RATED POWER 16.08W 16.05W 16W 16.08W 16.2W 16.2W 16.38W 16.32W 16.2W 250mVp-p 250mVp-p RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 350mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.6 1500ms, 80ms / 115VAC at full load 500ms, 80ms / 230VAC HOLD UP TIME (Typ.) 16ms at full load 230VAC /115VAC VOLTAGE RANGE Note.5 90 ~ 305VAC 127 ~ 431VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.97/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer toPower Factor Characteristi curve) TOTAL HARMONIC DISTORTION THD< 20% when output loading60% at 115VAC/230VAC input and output loading 75% at 277VAC input INPUT EFFICIENCY (Typ.) 84% 84% 86% 86% 86% 86% 86% 86% 86% AC CURRENT 0.4A / 115VAC 0.25A / 230VAC 0.2A/277VAC INRUSH CURRENT (Typ.) COLD START 45A(twidth=200s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 14 units (circuit breaker of type B) / 24 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 108% OVER CURRENT Note.4 Protection type : Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. PROTECTION 15 ~ 18V 17.5 ~ 21V 23 ~ 27V 28 ~ 35V 34 ~ 40V 41 ~ 49V 46 ~ 54V 54 ~ 63V 59 ~ 66V OVER VOLTAGE Protection type : Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down -35 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT -40 ~ +80, 10 ~ 95% RH STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08,EN61347-1, EN61347-2-13 independent,EN62384,J61347-1, SAFETY STANDARDS J61347-2-13 approved,IP67 (optional) Design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55015 EN61000-3-2 Class C (50% load) EN61000-3-3 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547,light industry level(surge 2KV), criteria A MTBF 473.3Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 148*40*32mm (L*W*H) 0.21Kg 40pcs/9.4Kg/1.02CUFT PACKING NOTE % & ( % )% % & *+ , * % & -. - / & & 012 3 2 % / 4 & 5 & & 6 0 & 7 88 & % & + & % & % % & 3 9 1 % & & 3 )3 1 2 / & : 9 To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains. File Name:LPF-16-SPEC 2015-05-2816W Single Output Switching Power Supply LPF-16 series Mechanical Specification Case No. : LPF-16A Unit:mm 30020 148 30020 3.5 SJTW 18AWG AC/N(Blue) SVT 18AWG*2C AC/L(Brown) Tcase +V(Red) 60 -V(Black) 3.5 T case: Max. Case Temperature. Recommend Mounting Direction Block Diagram Fosc : 100KHz RECTIFIERS EMI FILTER POWER PFC +V I/P & & SWITCHING CIRCUIT -V RECTIFIERS FILTER O.L.P. DETECTION O.L.P. PWM & PFC CIRCUIT CONTROL O.V.P. DeratingDerating Curve Curve Static Characteristics 100 100 90 80 80 70 60 60 40 50 20 40 -35 -30 -15 0 15 30 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 175175 180 200 230 305 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:LPF-16-SPEC 2015-05-28 3.6 3.6 LOAD (%) 3.5 40 LOADLOAD (%) (%) 13 3.5 32