25W Constant Voltage + Constant Current LED Driver LPF-25 series Users Manual IP67 7 8 3 44 : - 4 5/ +- %%%% - - %&% ( ) * + , - ./01 1 ( & 2 3/% + 4 5/ ( , - -1 6 7) ) % * &% &5 * *. * 8 6 9 File Name:LPF-25-SPEC 2021-09-0325W Constant Voltage + Constant Current LED Driver LPF-25 series SPECIFICATION MODEL LPF-25-12 LPF-25-15 LPF-25-20 LPF-25-24 LPF-25-30 LPF-25-36 LPF-25-42 LPF-25-48 LPF-25-54 36V 42V DC VOLTAGE 12V 15V 20V 24V 30V 48V 54V CONSTANT CURRENT REGION Note.2 6.6 ~12V 8.25 ~ 15V 11 ~ 20V 13.2 ~ 24V 16.5 ~ 30V 19.8 ~ 36V 23.1 ~ 42V 26.4 ~ 48V 29.7 ~ 54V RATED CURRENT 2.1A 1.67A 1.25A 1.05A 0.84A 0.7A 0.6A 0.53A 0.47A 25.2W 25.2W RATED POWER Note.5 25.2W 25.05W 25W 25.2W 25.2W 25.44W 25.38W RIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 250mVp-p 250mVp-p 250mVp-p 350mVp-p OUTPUT 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% VOLTAGE TOLERANCE Note.4 0.5% 0.5% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 2.0% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME Note.6 1500ms, 80ms / 115VAC 500ms, 80ms / 230VAC 16ms/115VAC 16ms/230VAC HOLD UP TIME (Typ.) 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF 0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC,230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 84% 85% 86% 86% 86% 86% 87% 86.5% 86% 0.4A / 115VAC 0.25A / 230VAC 0.2A/277VAC AC CURRENT INRUSH CURRENT(Typ.) COLD START 50A(twidth=200s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 12 units (circuit breaker of type B) / 21 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT PROTECTION 15 ~ 18V 17.5 ~ 21V 28 ~ 35V 34 ~ 40V 41 ~ 49V 46 ~ 54V 54 ~ 63V 59 ~ 66V 23 ~ 27V OVER VOLTAGE Shut down and latch off o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. Tcase=-35 ~ +70 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+70 20 ~ 95% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08 ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, SAFETY STANDARDS Note.8 J61347-1,J61347-2-13,EAC TP TC 004,GB19510.1,GB19510.14,IP67 approved Design refer to UL60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C ( load50%) BS EN/EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020 EMC EMISSION Note.8 EMC IMMUNITY Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11 BS EN/EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020 MTBF 473.4Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 148*40*32mm (L*W*H) 0.36Kg 40pcs/ 15.4Kg/1.02CUFT PACKING ) <=+ - &% 1 ( NOTE > 64 4< + = 9 = = A > & 6 B % C ( (- ) > % ) B */ * + D 1 - ( E9+ +4 6 + 649+4 F 5 + =< = - / + ( ( G 9 ( (- 1 G G - 8. + G H , - ( ( - . + - H - %1%%% + 1 - 7 + 1 81 ( /% )% - < I ( D )) + ( & )%% )%% %%75 %% 8 ) - 4 1 (