LPF-40D-20 Mean Well

40W Constant Current Mode LED Driver LPF-40D series IP67 7 -&/% & ,8 7 = -&/% & 8 22 : ) 2 34 ( *, <% % , , %& ()& % & * + , - ./ / 0 1- * 2 34 + , ,/ 5 ( = , , 6 7()& (%& ) & ) & & 3& )& -& % &8 6 9 File Name:LPF-40D-SPEC 2016-06-2340W Constant Current Mode LED Driver LPF-40D series SPECIFICATION MODEL LPF-40D-12 LPF-40D-15 LPF-40D-20 LPF-40D-24 LPF-40D-30 LPF-40D-36 LPF-40D-42 LPF-40D-48 LPF-40D-54 36V 42V DC VOLTAGE 12V 15V 20V 24V 30V 48V 54V 1.12A 0.96A RATED CURRENT 3.34A 2.67A 2A 1.67A 1.34A 0.84A 0.76A RATED POWER Note.5 40.08W 40.08W 40W 40.08W 40.2W 40.32W 40.32W 40.32W 41.04W 21.6 ~ 36V 25.2 ~ 42V OUTPUT CONSTANT CURRENT REGION Note.2 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 28.8 ~ 48V 32.4 ~ 54V 5.0% max. rated current CURRENT RIPPLE CURRENT TOLERANCE 5.0% SETUP, RISE TIME Note.6 1000ms, 80ms / 115VAC 500ms, 80ms / 230VAC 16ms/230VAC 16ms/115VAC HOLD UP TIME (Typ.) 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF 0.95/230VAC, PF0.92/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC,230VAC load 75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 84% 85% 86% 88% 88% 88.5% 89% 89% 87% AC CURRENT 0.6A / 115VAC 0.3A / 230VAC 0.25A/277VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=210 s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed. PROTECTION 34 ~ 40V 46 ~ 54V 59 ~ 66V 15 ~ 17V 17.5 ~ 21V 23 ~ 27V 28 ~ 35V 41 ~ 49V 54 ~ 63V OVER VOLTAGE Shut down o/p voltage, re-power on to recover Shut down o/p voltage, re-power on to recover OVER TEMPERATURE WORKING TEMP. Tcase=-40 ~ +80 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+80 20 ~ 95% RH non-condensing WORKING HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750, CSA C22.2 No. 250.0-08(except for 48V, 54V), ENEC EN61347-1, EN61347-2-13 independent, EN62384, IP67, SAFETY STANDARDS Note.8 J61347-1, J61347-2-13 approved design refer to UL60950-1, TUV EN60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55015,EN61000-3-2 Class C ( load60%) EN61000-3-3 EMC EMISSION Note.8 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level (surge immunity Line-Line 2KV) MTBF 1144.7K hrs min. Telcordia SR-332 (Bellcore) 394.9Khrs min. MIL-HDBK-217F (25) 162.5*43*32mm (L*W*H) OTHERS DIMENSION 0.45Kg 32pcs/15.4Kg/0.93CUFT PACKING ( > * ) & / )% NOTE ) 62&2>A *B 9 C 6 D ) BE , () ( D 4 * / % , F9* *2 B 6 * 629*2 G 3 * > , 4 * 5 9 , / 5 5 , - * 7A:( %( ( / A:( %( (/ A:(44 A:(43)% (8 > * 5 = / , , ( * , = , <% / * / , 7 * / 8/ 4% (( , > H File Name:LPF-40D-SPEC 2016-06-23