90W Constant Voltage + Constant Current LED Driver L PF-90 series I P 6 7 File Name:LPF-90-SPEC 2020-12-1090W Constant Voltage + Constant Current LED Driver L PF-90 series SPECIFICATION MODEL LPF-90-15 LPF-90-20 LPF-90-24 LPF-90-30 LPF-90-36 LPF-90-42 LPF-90-48 LPF-90-54 15V 20V 24V 30V 36V 42V 48V 54V DC VOLTAGE 21.6 ~ 36V 25.2 ~ 42V CONSTANT CURRENT REGION Note.2 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 28.8 ~ 48V 32.4 ~ 54V RATED CURRENT 5A 4.5A 3.75A 3A 2.5A 2.15A 1.88A 1.67A 75W 90W 90W 90W 90W 90.3W 90.24W 90.18W RATED POWER Note.5 200mVp-p 200mVp-p RIPPLE & NOISE (max.) Note.3 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p OUTPUT 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% 4.0% VOLTAGE TOLERANCE Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LINE REGULATION 0.5% 0.5% 1.5% 1.0% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME Note.6 1200ms, 200ms / 115VAC 500ms, 200ms / 230VAC 16ms/230VAC 16ms/115VAC HOLD UP TIME (Typ.) 90 ~ 305VAC 127 ~ 431VDC VOLTAGE RANGE Note.5 (Please refer toSTATIC CHARACTERISTI section) FREQUENCY RANGE 47 ~ 63Hz PF0.97/115VAC, PF0.96/230VAC, PF0.92/277VAC full load POWER FACTOR (Please refer toPOWER FACTOR (PF) CHARACTERISTI section) THD< 20%( load60%/115VC,230VAC load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to TOTAL HARMONIC DISTORTION(THD) section) INPUT EFFICIENCY (Typ.) 89% 90% 90.5% 91% 91% 91% 91% 91% 0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC AC CURRENT INRUSH CURRENT(Typ.) COLD START 70A(twidth=435s measured at 50% Ipeak) at 230VAC Per NEMA 410 MAX. No. of PSUs on 16A 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 240VAC 95 ~ 108% OVER CURRENT Constant current limiting, recovers automatically after fault condition is removed PROTECTION 18 ~ 21V 28 ~ 34V 34 ~ 38V 41 ~ 46V 47 ~ 53V 54 ~ 60V 59 ~ 65V 23 ~ 27V OVER VOLTAGE Shut down o/p voltage, re-power on to recover OVER TEMPERATURE Shut down o/p voltage, re-power on to recover WORKING TEMP. Tcase=-40 ~ +70 (Please refer to OUTPUT LOAD vs TEMPERATURE section) MAX. CASE TEMP. Tcase=+70 20 ~ 95% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/ (0 ~ 50) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes UL8750(typeHL), CSA C22.2 No.250.13-12, ENEC EN61347-1, EN61347-2-13 independent, EN62384, J61347-1, J61347-2-13, SAFETY STANDARDS Note.8 EAC TP TC 004, GB19510.1,GB19510.14,IP67 approved Design refer to UL60950-1 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55015,EN61000-3-2 Class C ( load60%) EN61000-3-3,GB17743 and GB17625.1,EAC TP TC 020 EMC EMISSION Note.8 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11 EN61547, light industry level (surge immunity Line-Line 2KV),EAC TP TC 020 MTBF 301.6Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 161*61*36mm (L*W*H) 0.7Kg 20pcs/15Kg/0.73CUFT PACKING NOTE 8. ,