100W Single Output Switching Power Supply L PV-100 series IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL R-41027766 I P 6 7 SPECIFICATION MODEL LPV-100-5 LPV-100-12 LPV-100-15 LPV-100-24 LPV-100-36 LPV-100-48 DC VOLTAGE 5V 12V 15V 24V 36V 48V RATED CURRENT 12A 8.5A 6.7A 4.2A 2.8A 2.1A CURRENT RANGE 0 ~ 12A 0 ~ 8.5A 0 ~ 6.7A 0 ~ 4.2A 0 ~ 2.8A 0 ~ 2.1A RATED POWER 60W 102W 100.5W 100.8W 100.8W 100.8W RIPPLE & NOISE (max.) Note.2 80mVp-p 120mVp-p 120mVp-p 150mVp-p 150mVp-p 150mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 8.0% 5.0% LINE REGULATION 1.0% LOAD REGULATION 6.0% 2.0% SETUP, RISE TIME Note.6 2000ms, 25ms / 230VAC 2000ms, 25ms / 115VAC HOLD UP TIME (Typ.) 50ms/230VAC 14ms/115VAC at full load VOLTAGE RANGE Note.4 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% 85% 87% 88% 88% 89% INPUT AC CURRENT 2.2A/115VAC 1.2A/230VAC INRUSH CURRENT(Typ.) COLD START 75A(twidth=700s measured at 50% Ipeak) at 230VAC MAX. No. of PSUs on 16A 2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT 0.25mA / 240VAC 110 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 41.4 ~ 48.6V 55.2 ~ 64.8V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover -25 ~ +70 (Refer toDerating Curv) WORKING TEMP. 20 ~ 90% RH non-condensing WORKING HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION UL8750,CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,BIS IS15885(for LPV-100-12,LPV-100-24 only), SAFETY STANDARDS EAC TP TC 004,IP67 IEC/EN 62368-1 approved. WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55032 (CISPR32) Class B, EN61000-3-2 Class A(80% load), EN61000-3-3, EAC TP TC 020 EMC EMISSION Compliance to EN61000-4-2,3,4,5,6,8,11 EN55024, light industry level, criteria A, EAC TP TC 020 EMC IMMUNITY MTBF 703Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 190*52*37mm (L*W*H) 0.63Kg 20pcs/13.6Kg/0.55CUFT PACKING NOTE 100W Single Output Switching Power Supply L PV-100 series Mechanical Specification Case No. LPC-100A Unit:mm 190 30010 30010 3.5 UL 1015 18AWG AC/N(Blue) UL 1015 14AWG T case -V(Black) AC/L(Brown) 96 +V(Red) 3.5 T case: Max. Case Temperature. Recommend Mounting Direction Block Diagram fosc : 65KHz RECTIFIERS EMI FILTER POWER +V I/P & & SWITCHING -V RECTIFIERS FILTER DETECTION O.L.P. PWM CIRCUIT CONTROL O.V.P. DDeerraattiinng Cg Cuurrvvee Static Characteristics 100 Others 100 90 80 80 5V,12V 70 60 60 40 50 20 40 -25 -15 00 15 30 40 50 60 70 (HORIZONTAL) 90 100 125 135 145 155 165 117755 180 200 230 264 AMBIENT TEMPERATURE () INPUT VOLTAGE (V) 60Hz File Name:LPV-100-SPEC 2020-10-14 2 - 4.5 LOAD (%) 2.5 3.5 52 17 LOAD (%) 3.5 37