150W Single Output Switching Power Supply LPV-150 series Users Manual IS 15885(Part 2/Sec13) THOMAS SAMUEL THOMAS SAMUEL IP67 ( ( (for LPV-150-12,24 only) R-41027766 2 ) ( ( 2 ) ( ( 8 & & - 9 43 8 5 94 8 ( * 01 1 8 + < 7 =6 =6 & = 6 ( & + & ( > + & ( , & 8 /( A B *+ 3 C 8 3 ( ( % & ( ( ) & & & & ** + , - / * 01 & ( (+ 2 & & 3 + + 3+ 40 .5 3 3 6 & 6 & 2 )7 8 & 5 94 8 : 7 8 & - 9 43 8 File Name:LPV,LPVL-150-SPEC 2021-09-03150W Single Output Switching Power Supply LPV-150 series SPECIFICATION LPV -150-12 MODEL LPV-150-15 LPV -150-24 LPV-150-36 LPV-150-48 12V 15V 24V 36V 48V DC VOLTAGE RATED CURRENT 10A 8A 6.3A 4.2A 3.2A CURRENT RANGE 0 ~ 10A 0 ~ 8A 0 ~ 6.3A 0 ~ 4.2A 0 ~ 3.2A 120W 151.2W 151.2W 153.6W RATED POWER 120W 200mVp-p RIPPLE & NOISE (max.) Note.2 200mVp-p 200mVp-p 200mVp-p 200mVp-p OUTPUT VOLTAGE TOLERANCE Note.3 5.0% 1.0% LINE REGULATION LOAD REGULATION 2.0% SETUP, RISE TIME Note.6 LPV-150: 500ms, 50ms / 230VAC 500ms, 50ms / 277VAC LPVL-150: 1500ms, 50ms / 115VAC HOLD UP TIME (Typ.) LPV-150: 18ms/230VAC 20ms/277VAC at full load LPVL-150: 10ms/115VAC at full load VOLTAGE RANGE Note.4 LPV-150: 180 ~ 305VAC 254 ~ 431VDC LPVL-150: 90~132VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 87% 88% 89% 89% 90% AC CURRENT LPV-150: 1.7A/230VAC 1.5A/277VAC LPVL-150: 3.0A/115VAC Blank type COLD START 60A(twidth=900s measured at 50% Ipeak) at 230VAC INRUSH CURRENT (Typ.) L type COLD START 75A(twidth=900s measured at 50% Ipeak) at 115VAC INPUT 2 units (circuit breaker of type B) / 3 units (circuit breaker of type C) at 230VAC Blank type MAX. No. of PSUs on 16A CIRCUIT BREAKER L type 1 units (circuit breaker of type B) / 2 units (circuit breaker of type C) at 115VAC LEAKAGE CURRENT LPV-150: 0.25mA / 240VAC LPVL-150:0.25mA / 120VAC 110 ~ 150% rated output power OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION 13.5 ~ 18V 17 ~ 25V 27 ~ 35V 40 ~ 49V 52 ~ 63V OVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down OVER TEMPERATURE WORKING TEMP. -25 ~ +65 (Refer toDerating Curv) 20 ~ 90% RH non-condensing WORKING HUMIDITY STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH ENVIRONMENT TEMP. COEFFICIENT 0.03%/(0 ~ 40 for LPV-150-12,15 and LPVL-150-12,24 0~50 for LPV-150-24,36,48) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL8750,CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,BIS IS15885(for LPV-150-12,24 only),EAC TP TC 004, Blank type SAFETY IP67, IEC62368-1 approved Design refer to BS EN/EN62368-1 STANDARDS L type UL8750(typeHL),CSA C22.2 No 250.13-12,UL879,CSA C22.2 No.207-M89,IP67 approved WITHSTAND VOLTAGE I/P-O/P:3KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25/ 70% RH EMC Blank type Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class A(%80 load), BS EN/EN61000-3-3, EAC TP TC 020 EMC EMISSION L type Compliance to FCC part 15 Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11 BS EN/EN55024, light industry level, criteria A, EAC TP TC 020 Blank type EMC IMMUNITY L type Design refer to IEC61000-4-2,3,4,5,6,8,11 light industry level, criteria A MTBF 703Khrs min. MIL-HDBK-217F (25) OTHERS DIMENSION 191*63*37.5mm (L*W*H) LPV-150: 0.74Kg 20pcs/15.8Kg/0.95CUFT LPVL-150: 0.85Kg 20pcs/17Kg/0.95CUFT PACKING 6/ ( 34 8 8 + 3 NOTE 3 D E 3 AC ( & 3F E .1 4 / 7 + & & . & ( & ) / ( G 8 ( + G G ( 8 & 0 & / & 6 =6 ( ( 1 & 5 / & 4 = = & & 3 0 - ( * + &